Manual Klarfit 10033591 Barracuda (page 22 of 72) (English, German, French, Italian, Portuguese, Spanish)

777167

Zoom out

Zoom in

1/72

SETUP AND OPERATION

First use

1. Position the outboard electric motor at the stern of the vessel in the

storage position.

2. Carefully pull on the rear screws until they grip in the suspension.

3. Press the rocker arm down and use the handle to slowly lower the motor

into the water.

4. Use the depth adjusting ring to adjust the height of the motor (the

recommended operating depth is between 150 mm and 300 mm below

the water surface).

5. Once you are sure that the engine is at a safe depth, where there is no

risk of touching the bottom of the lake, river or other body of water, you

can tighten the rear propellers rmly.

6. Once you have tightened the rear screws, make sure the batteries are

connected to the motor. Make sure that the knob is in neutral position (0)

and that the nuts are securely connected to the clamps to ensure a good

connection.

7. Set the desired speed and direction using the turning handle on the tiller.

8. Do not change from full speed forward to full speed backward without

stopping the engine, otherwise engine damage may result.

Operaon of the engine

The delivery of the engine does not include batteries. Select a battery with

12V (24V for 86 LBS motor) output power. It is recommended to use a deep

cycle battery or ship battery, as they last longer and are harder to destroy.

On/o speed control

• Turn the knob clockwise to set one of the ve forward speed levels.

• Turn the knob counterclockwise to set one of the 3 reverse speed levels.

• Move the knob to the position marked “0” to stop the engine.

Baery level indicator

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Klarfit 10033591 Barracuda in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1.14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Klarfit 10033591 Barracuda Manual

Product: