777766

Klarfit 10031408 Strongbase Manual

27
Zoom out
Zoom in
Previous page
1/28
Next page
27
Step 6
1. Assembly of the upper cable (54)
a. With the upper cable (54) in groove of pulley (27), thread the upper cable (54)
through the upper cross beam (8).
b. Install pulley no.1 (27) And two pulley bushings (32) to the upper cross beam (8),
using one M10x65mm hex bolt (24), two M10 washers (35) and one M10 nylon nut
(58).
c. Install pulley no.2 (27) And two pulley bushings (32) to the upper cross beam (8),
using one M10x65mm hex bolt (24), two M10 washers (35) and one M10 nylon nut
(58).
d. Install pulley no.4 (27) To the upper cross beam (8), using one M10x45mm hex bolt
(25), two M10 washers (35) and one M10 nylon nut (58).
e. Attach the bolt end of upper cable (54) to the selector shaft (68) with a plastic
washer (65).
f. Install pulley no.3 (27) To the pulley u (37), using one 10x45mm hex bolt (25), two
M10 washers (35) and one M10 nylon nut (58).
g. Attach the lat bar (9) to the other end of upper cable (54) using one pothook (40).
2. Assemble the buttery cable (57)
a. Attach both ends of buttery cable (57) to the left and right buttery arm (6&7),
using two M10x35mm hex bolts (70), two M10 nuts (10), four M10 washers (35)
and two M10 nylon nuts (58).
b. Install pulley no.5&7 (27) To the pulley bracket (26), using two M10x45 mm hex
bolts (25), four M10 washers (35) and two M10 nylon nuts (58).
c. Install pulley no.6 (27) To the reverse u (36), using one M10x45mm hex bolt (25),
two M10 washers (35) and one M10 nylon nut (58).
3. Assembly the lower cable (45)
a. With the lower cable (45) in groove of pulley (27) through the leg extension tube
(11).
b. Install pulley no.8 (27) And two pulley bushings (32) to the leg extension tube (11),
using one M10x65mm hex bolt (24), two M10 washers (35) and one M10 nylon nut
(58).
c. Install pulley no.9 (27) And two pulley bushings (32) to the main support tube (4),
using one M10x65mm hex bolt (24), two M10 washers (35) and one M10 nylon nut
(58).
d. Install pulley no.10 (27) To the reverse u (36), using one M10x45mm hex bolt (25),
two M10 washers (35) and one M10 nylon nut (58).
e. Install pulley no.11 (27) To the main base tube (1), using one M10x45mm hex bolt
(25), two M10 washers (35) and one M10 nylon nut (58).
f. Install pulley no.12 (27) To the pulley u (37), using one M10x45mm hex bolt (25),
two M10 washers (35) and one M10 nylon nut (58).
g. Attach the end of lower cable (45) to the main base tube (1), using one M8x40mm
hex bolt (50), two M8 washers (19), one M8 nylon nut (20), one pothook (40) and
one chain (59).
h. Attach the lower bar (13) to the other end of lower cable (45), using two pothooks
(40) and one chain (59).
… 27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarfit 10031408 Strongbase at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarfit 10031408 Strongbase in the language / languages: English, German as an attachment in your email.

The manual is 3.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info