777917
16
Zoom out
Zoom in
Previous page
1/28
Next page
16
Console: Operation
Activating the treadmill:
Put the electrical plug in a grounded wall outlet and then turn on the
power switch on the front right side of the treadmill (see picture 1) .
As soon as the power is turned on a short sound is emitted that me-
ans the product is in stand-by mode. Attach the safety strap magnet
(see picture 2) in the round hole on the front of the control panel.
(The display shows ”- - -” if you have not attached the safety strap
on the front of the display).
Starting the belt:
Press the start button, The display counts down and beeps three
times. The belt starts at the lowest
speed (0,8km/h], the pre—set program time is 60 minutes.
Changing speed:
There are several ways of changing speed.
Increase/decrease speed with the arrow buttons on the control
panel.
Increase speed with the + / - button on the handrail.
Go straight to 3, 5, 7km/h with the quick choice buttons on the
control panel.
Changing program time before starting in manual control
mode:
Press the Mode button once (the display shows 30 minutes).
Select desired program time (total minutes) with the t/s
Press the start button, the display counts down and beeps three
times. The belt starts at the lowest speed (0,8km/h).
Select desired speed.
The display counts down from the selected time.
Choosing distance before start in manual control mode:
Press the Mode button twice (the display shows 1 km).
Select distance (total km) with the arrow buttons.
Press the start button, the display counts down and beeps three
times. The belt starts at the lowest speed (0,8km/h].
Select desired speed.
The display counts down from the selected distance
Using the twelve atomatic programs P01-P12
Press the PROG button until the desired program is shown in the display.
The pre-set time 30 minutes blinks in the display. Use the arrwo buttons to enter the desired time
(5-60 minutes).
Press the start button. The automatic program starts after a three second countdown.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Klarfit 10026385Pacemaker X3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Klarfit 10026385Pacemaker X3 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info