784447
60
Zoom out
Zoom in
Previous page
1/64
Next page
60
Mounting the hood
For exhaust air operation, attach an
exhaust air hose (diameter 150 mm)
in the cut-out on the air outlet of the
cooker hood and connect it to the
exhaust air opening.
Make sure that the metal grease lter
is fully reinserted before using the
appliance.
Screw the supplied screws into the
holes provided on the bottom of the
funiture, but not completely yet.
Place the screw holes on the top of the
hood onto the screws, move the hood
body so that the screws slide into the
narrow part of the screw holes and
tighten the screws from the inside of
the hood.
9.2 Mounting on the underside
of a hanging furniture
To attach the hood to the underside
of a wall cabinet or similar,
proceed as follows:
Remove the metal lters from the
hood, li the hood body and place it
on the bottom of the hanging furniture
in the desired position.
Mark the size and position of the air
outlet and the cable connection,
as well as the drill holes and from the
inside of the hood on the furniture
bottom and put the hood down again.
Saw a recess for the exhaust air
opening and the cable connection in
the furniture bottom and pre-drill the
screw hole markings accordingly.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe TEL350 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe TEL350 in the language / languages: English, German as an attachment in your email.

The manual is 1.04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info