Manual KKT Kolbe SOLO609S (page 58 of 64) (English, German)

784429

Zoom out

Zoom in

1/64

Mounting the hood

Edges and internal components can be

sharp-edged and cause injuries.

Exercise appropriate caution and pro-

tect yourself if necessary, e.g. with work

gloves.

For installation on solid masonry,

proceed as described below.

If the appliance is to be mounted on a

dierent type of wall (e.g. plasterboard,

aerated concrete, Poroton brick), replace

the mounting material according to the

substrate.

If the mounting surface is made of wood,

you can do without the dowels.

However ensure a secure hold.

• Determine the desired position for

mounting the hood body support

bracket centrally above your hob

according to the previously mentioned

distance regulations and dimensions.

Note: The hood will later be suspen-

ded from the bracket on the rear up-

per edge. To be sure, you can also x it

beforehand and pre-align it optically.

• Place the hood body support bracket

horizontally at the desired position

on the wall using a spirit level and

mark the position of the screw holes.

• Drill a hole at each of the marked

positions according to the diameter

of the dowels.

• Then carefully tap a dowel into each

of the holes with a hammer and fasten

the bracket to them with the screws

provided (4.2 × 30 mm).

boreholes

screws

dowels

support

bracket

• Raise the hood body and attach it to

the wall bracket.

9. Mounting the hood

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe SOLO609S in the language / languages: English, German as an attachment in your email.

The manual is 1.41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

KKT Kolbe SOLO609S Manual

Product: