784296
73
Zoom out
Zoom in
Previous page
1/80
Next page
73
EN
Installation
!
9. Installation
9.1 Important notes and installation requirements
The hob must be installed by a qualied electrician.
A circuit breaker (fuse) providing full disconnection from the mains
power supply must be integrated into the permanent wiring
and comply with local regulations.
This fuse must be tested and have at least 3 mm clearance around
all poles (or around all active [phases] conductors, if provided for in
the regulations).
The fuse must be easily accessible.
Contact a suitably qualied professional, if you are not sure
about the installation.
The worktop must be made of insulating and heat-resistant material
to prevent electric shocks and deformation caused by heat radiation.
Wood and similar brous or hygroscopic material must not be used
as a material for the worktop unless it is impregnated.
The worktop must be at and horizontal and nothing must protrude
into the work area.
The wall above the work surface, adjacent and surrounding surfaces,
and any adhesives used must be heat-resistant up to 90°C.
If the hob is installed above a drawer, furniture compartment, etc.
or is accessible from below, a thermal protection barrier must be
tted below the base of the hob (described in the following).
Use surfaces that are easy to clean (e.g. ceramic tiles) as wall sur-
faces around the cooking area.
The hob must not be installed on cooling equipment, dishwashers or
drum dryers.
The hob must be installed in such a way that good heat radiation can
be guaranteed to ensure proper functioning.
Under any circumstances, make sure that the hob is well ventilated
and that the supply and exhaust air is not blocked.
To do this, follow the instructions described in the following. .
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe KF5900IND-ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe KF5900IND-ED in the language / languages: English, German as an attachment in your email.

The manual is 1.97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info