784310

KKT Kolbe GK7021G Manual

127
Zoom out
Zoom in
Previous page
1/150
Next page
53
EN
Fitting and Installation
• There may also be an indirect air flow from neighbouring rooms,
as long as these rooms are directly ventilated, there is no fire
hazard and they are not bedrooms.
The air flow between the adjacent room and the installation room
must be free, if necessary, through permanent openings.
(This can be achieved by increasing the gap between the door and
the floor).
Further instructions and requirements for installation
• Before installation, make sure that the local distribution con-
ditions (type of gas and gas pressure) are compatible with the
appliance characteristics. The characteristics of this appliance
are indicated on the rating plate.
• For installation, all dimensional specifications and distance regula-
tions in this manual, as well as other applicable regulations, must
be observed and complied with.
• Make sure that the worktop intended for installing the hob meets
all the necessary requirements (described in the following section)
and that nothing protrudes into the cooking area.
• The materials of adjacent and surrounding surfaces, as well as
adhesives used, must be fireproof / heat resistant up to 100°C
to exclude deformation of surfaces or detachment of coatings.
If you are not sure about this, plan at least 200 mm distance
between the edges of the appliance and materials in question
or protect them with a layer of fireproof material.
• Use easy-to-clean surfaces made of fireproof material (e.g. ceramic
tiles) as wall surfaces around the cooking area.
• Always keep a minimum distance of 500 mm between the edges of
the hob and combustible materials, such as furniture or curtains.
• Side furniture walls or other boundaries above the hob may only be
located on one side of the hob at a distance of at least 100 mm.
• The safety distance from the hob to an extractor bonnet
or wall units directly above the hob must be at least 760 mm
or 650 mm to other wall units, shelves etc. .
… 127 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe GK7021G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe GK7021G in the language / languages: English, German as an attachment in your email.

The manual is 4.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info