Manual KKT Kolbe GK7021E (page 140 of 150) (English, German)

784309

140

Zoom out

Zoom in

1/150

Fitting and Installation

7.6 Adjusting the minimum level setting

The gas flow or flame intensity when the control dial is set

to the minimum level is set at the factory according to the

pre-mounted injector nozzles.

After replacing the injector nozzles or in case of special pres-

sure conditions, it is necessary to have them adjusted

by a suitably qualified specialist.

This can be done regardless of the positioning or fixing of the

hob, as follows:

• Ignite the burner whose minimum level setting

you want to adjust.

• Turn the corresponding control knob to the

minimum position.

• Remove the knob of the rotary control including the bearing

rubber and, using a screwdriver of suitable size, turn the

regulating screw (see illustration) to the appropriate posi-

tion corresponding to the type of gas used, as follows:

Adjustment of the minimum level for natural gas operation

• Turn the regulating screw clockwise or counterclockwise

until a small, even flame is produced.

Adjustment of the minimum level for LPG operation

• Fully tighten the adjusting screw (clockwise).

• Refit the knob including the bearing rubber.

• Make sure that the regulation now set is sufficient ...

• that the flame does not go out when you quickly turn the

control from the maximum to the minimum position.

• to maintain the heating of the thermocouple so that the

flame is not extinguished.

If this is not the case, correct the setting accordingly.

Note:

The burners do not require regulation of the primary air.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe GK7021E in the language / languages: English, German as an attachment in your email.

The manual is 4.48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

KKT Kolbe GK7021E Manual

Product: