784309
137
Zoom out
Zoom in
Previous page
1/150
Next page
63
EN
Fitting and Installation
 Connection sequence for conical connections:
Cylindrical male adapter
Seal, female gas adapter
conical-cylindrical or cylindrical components
Make the connection in such a way that no pressure is
exerted on the connection nuts and piping or the appliance
is exposed to any other pressure.
Make sure that the pipe cannot become blocked, kinked
or crushed or come into contact with sharp edges or hot
areas, both during and after installation (e.g. due to moving
parts).
After completion of the gas connection
After completing the gas connection, turn on the gas tap
and check all connection points for leaks as described
below, but never with a flame!
 Checking the gas connection for leaks
To check for leaks, apply a soap solution of 50%
liquid soap and 50% water or commercially available
leak detection spray to the connection points of the
gas pipe, for example, after turning on the gas tap
and make sure that the gas outlet openings of the
injector nozzles are closed (press a finger on the
opening, for example).
If bubbles form at one of the points in question,
gas is escaping there.
In this case, immediately turn off the gas supply and
seal the corresponding connection.
When the connecting parts are disassembled and reassem-
bled, always replace the seals with new ones.
137


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe GK7021E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe GK7021E in the language / languages: English, German as an attachment in your email.

The manual is 4.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info