Manual KKT Kolbe FLAT INSEL 5 (page 63 of 68) (English, German)

784441

Zoom out

Zoom in

1/68

Mounting the hood

10. Mounting the hood

Edges and internal components can be

sharp-edged and cause injuries.

Exercise appropriate caution and pro-

tect yourself if necessary, e.g. with work

gloves.

Install the appliance with at least two

persons!

• To prevent air leakage in exhaust air

mode (i.e. backow of outside air),

install the supplied backow aps on

the top of the bonnet in the air outlet.

Note: This step is not necessary for

recirculation mode or if there is alrea-

dy a backow ap in the exhaust air

system of your kitchen.

• Position the suspension plate on the

ceiling, if desired with the round cut-

out on the exhaust opening, mark the

position of the screw holes.

• Drill the holes according to the xing

screws. These depend on the type of

ceiling (see next step).

• Secure the suspension plate to the

ceiling by tightening it with 7

M5 screws or to a concrete ceiling

with 4 dowel screws.

• Then use 8 M5 screws to connect the

suspension plate to the angle rods.

• Extend the angle rods to the desired

height and x them with 16 M5 screws

and nuts.

Important: The overlap length must

be at least 100 mm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe FLAT INSEL 5 in the language / languages: English, German as an attachment in your email.

The manual is 1.04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

KKT Kolbe FLAT INSEL 5 Manual

Product: