784261
51
Zoom out
Zoom in
Previous page
1/64
Next page
51
EN
Using the appliance
Operation, setting and use
of the appliance
Manual setting and starting a cooking process
To set all parameters for a cooking process manually,
proceed as follows:
To select a cooking function / heating type,
press the key for microwave and oven functions
or the
key for steam cooking functions,
if necessary, several times or by subsequently touching
the and keys until the desired cooking function is
displayed as described in the corresponding table.
When the cooking function is selected, the respective
presettings of the parameters (microwave power, coo-
king temperature, grill level, steam value, if applicable)
and the cooking time are shown in the corresponding
display elds.
To change one of the preset values, activate the desired
parameter setting by touching the key several
times, if necessary, until the corresponding display
starts ashing.
As long as the activated setting display is ashing, use
the and keys to select the desired value from the
available options and then wait a few seconds
until the display stops ashing.
The current setting is then accepted.
Proceed in the same way for each further change of the
parameter settings.
To change the preset cooking duration, activate its
setting with the key (display starts ashing) and
use the and keys to set the desired time within the
adjustable range while the display is ashing.
Start the cooking process by touching the key.
The heating process starts and the time display shows
the countdown of the set cooking duration.
After the cooking time has elapsed, operation stops
automatically.
General notes on operation
The following instructions apply to both manually set
cooking processes and automatic programmes
(described later below):
The settings can each be changed as long as the corres-
ponding setting display is activated and ashing.
If no key is touched for a few seconds and the display
stops ashing, the current setting is automatically
applied.
If no key is touched for 5 minutes during setting or
interrupted operation (pause), the appliance switches
off automatically.
When the door is opened during operation, the cooking
process is automatically interrupted (pause).
Continue cooking after closing the door by touching
the key.
The oven lighting remains on during operation,
even if operation is interrupted (pause).
Change, Cancel, Pause and Exit
To discard the current settings and return to standby
mode, touch the key during the setting process.
To change the parameter settings during cooking,
touch the key during operation or, if applicable,
the key for changing the cooking duration (in auto-
matic programmes, this is only possible via the cooking
quantity setting) and then use the
and
keys as
described previously.
To interrupt a cooking process, touch the key during
operation.
The cooking process is paused.
To resume cooking after pausing, touch the key.
To cancel the cooking process / end it prematurely,
touch the key again after pausing.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe EBMS4503S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe EBMS4503S in the language / languages: English, German as an attachment in your email.

The manual is 1.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info