784259
52
Zoom out
Zoom in
Previous page
1/56
Next page
52
Installation
Installing the appliance
Fit the appliance into its surround (beneath a work-top
or above another appliance) by inserting screws and
plastic covers into the 4 holes that can be seen in the
frame of the oven (g.1,A).
For the most efcient air circulation, the oven should be
tted according to the dimensions shown in the instal-
lation sketch (g. 2). (For full dimensional drawings of
your oven to help with installation, please see section
„oven dimensions“.)
The rear panel of the cabinet must be removed so that
air can circulate freely. The panel to which the oven is
tted should have a gap of at least 70 mm at the rear
for ventilation (g. 3).
For a built-in oven to work well the cabinet must be
of the right type:
The panels of the adjoining furniture should be heat
resistant. Particularly when the adjoining furniture is
made of veneered wood, the adhesives should be able
to withstand a temperature of 120°C. Plastic materials
or adhesive which cannot withstand this temperature
will become deformed or unstuck.
To comply with safety regulations, once the appliance
has been tted it should not be possible to make con-
tact with the electrical parts.
All parts which offer protection should be xed in such
a way that they cannot be removed without the use of a
tool.
Important: Unplug your oven before performing
installation or maintenance!
Installation should be carried out according to the
instructions by a professionally qualied person.
The manufacturer declines all responsibility for any
damage to persons, animals or things due to a wrong
installation.
1
3 2
A
A
172mm
min. 550mm
860mm
min. 50mm
849mm
51.3mm 5.4mm
23.7mm
546mm
897mm
468mm
103mm
475mm
Duration End
C
°
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe EB9105ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe EB9105ED in the language / languages: English, German as an attachment in your email.

The manual is 1.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info