784255

KKT Kolbe EB8019EDP Manual

61
Zoom out
Zoom in
Previous page
1/68
Next page
61
EN
Cleaning and maintenance
Before starting the pyrolytic mode
• Remove accessories and cooking utensils, including
pull-out rails and protective elements, from the oven
before starting the pyrolytic mode and ensure that the-
re is no spilled food in the baking chamber to achieve
the best cleaning results.
• Remove large amounts of dirt from the cooking cham-
ber manually.
• Clean the inside of the appliance door and the edges of
the cooking chamber in the area of the seal.
Do not scrub or remove the seal.
• While doing these operations, make sure that the oven
switched off.
Setting pyrolytic self-cleaning mode
• Use the key and then the slider or und to
select the pyrolytic mode .
• Make sure that there are no accessories or food in the
cooking chamber and close the door tightly.
• Press the key to start the pyrolytic mode.
At the start of operation, the control panel is automati-
cally deactivated and the oven door is locked until the
appliance has cooled down.
• Ventilate the room during pyrolysis operation.
Pausing and cancelling the pyrolytic mode
• When the pyrolytic mode is started, all other functions
of the appliance are automatically disabled.
• If you want to pause or cancel the pyrolytic mode, you
must rst unlock the control panel.To do this, press
and hold the key for 3 seconds, then you can pause
or cancel the operation with the key: Press once to
pause, press twice to stop pyrolytic mode.
However, the appliance door is only unlocked automati-
cally when the temperature is safe.
Pyrolytic mode settings
• The pyrolytic mode settings are factory set and cannot
be changed.
After starting, the pyrolytic mode can only be paused or
stopped as described above.
After the pyrolysis process has been completed.
• When the pyrolytic mode is completed, a continuous
acoustic signal sounds. To interrupt this, press the
key or wait for the alarm to stop automatically.
• When the appliance has cooled down to a safe tempe-
rature, you can open the door again.
• When the cooking chamber has cooled down, remove
the combustion residue/ash by wiping the cooking
chamber including the door area with a damp cloth.
• Replace pull-out rails, protective elements and acces-
sories in the oven.
• If you wish to start another heating mode after pyroly-
sis, you must rst release the automatic safety lock on
the control panel by pressing and holding the key
for 3 seconds.
Notes:
• During pyrolytic mode, the frame on the inside of the
appliance may discolour. This is normal and has no
effect on the function.
The discoloration can be removed with a stainless steel
cleaner.
• Heavy soiling can cause white deposits to remain on
the enamel surfaces. These are caused by food resi-
dues and are harmless. They have no inuence on the
functionality.
If necessary, you can remove the residues with lemon
juice or other cleaning agents.
… 61 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe EB8019EDP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe EB8019EDP in the language / languages: English, German as an attachment in your email.

The manual is 1.55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info