784254
64
Zoom out
Zoom in
Previous page
1/68
Next page
64
Cleaning and maintenance
Replacing the lamp
If the cavity lamp fails, it must be replaced.
Heat-resistant, 25 watt, 230 V halogen lamps are availab-
le from specialist retailers.
When handling the halogen lamp, use a dry cloth.
This will increase the service life of the lamp.
Warning
Risk of electric shock!
When replacing the lamp, the lamp socket con-
tacts are live. Before replacing the lamp, unplug
the appliance from the mains or switch o the
circuit breaker in the fuse box.
Risk of burns!
The appliance becomes very hot. Never touch
the interior surfaces of the appliance or the
heating elements after operation. Always allow
the appliance to cool down before changing the
lamp. Keep children at a safe distance.
If the glass cover of the lamp is damaged,
it must be replaced.
Contact a specialist or customer service.
back outer case
power cord
brown {L}
yellow / green
blue {N}
terminal box
1234
65
Place a towel in the cold cavity to prevent damage.
Remove the glass cover as shown in the gure.
Pull out the lamp – do not turn it.
Insert the new lamp, making sure that the pins are in
the correct position. Push the lamp in rmly.
Replace the glass cover.
Remove the towel and switch on the circuit breaker to
see if lamp switches on.
A
!
Changing the power cord
Warning
Risk of electric shock!
In the event of damage, the power cable may only
be replaced by an authorised specialist!
Position A shows the terminal box position on the back of
the outer case and it’s closed.
Steps:
Cut off the power, use small at screwdriver to open
two snap 1 and 2.
Use a screwdriver to take off the screws 3, 4, 5 and 6.
Change the power cord. Fix the new yellow/green wire
on 3, the brown wire on 4 and the blue wire on 5.
Twist screw 6 to close the terminal box cover. The
changing is nished.
64


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe EB8017ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe EB8017ED in the language / languages: English, German as an attachment in your email.

The manual is 1.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info