784254
58
Zoom out
Zoom in
Previous page
1/68
Next page
58
Cleaning and maintenance
Cleaning and maintenance
Before cleaning the machine, let it cool down
and unplug from the mains.
Caution! - Risk of surface damage!
Do not use:
Harsh or abrasive cleaning agents.
Cleaning agents with a high alcohol content.
Hard scouring pads or cleaning sponges.
High-pressure cleaners or steam cleaners.
Special cleaners for cleaning the appliance
while it is hot.
Wash new sponge cloths thoroughly before use.
Cleaning Agent
With good care and cleaning, your appliance will retain its
appearance and remain fully functioning for a long time
to come. We will explain here how you should correctly
care for and clean your appliance.
To ensure that the different surfaces are not damaged by
using the wrong cleaning agent, observe the information
in the table. Depending on the appliance model, not all of
the areas listed may be on/in your appliance.
!
Kind of surface Cleaning
Appliance exterior
Stainless steel front
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Remove ecks of limescale, grease, starch and albumin (e.g. egg white) immediately.
Corrosion can form under such ecks.
Special stainless steel cleaning products suitable for hot surfaces are available from
our after-sales service or from specialist retailers.
Apply a very thin layer of the cleaning product with a soft cloth.
Plastic Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Do not use glass cleaner or a glass scraper.
Painted surfaces Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Control panel Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth. Do not use glass cleaner or a
glass scraper.
Door panels Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
Do not use a glass scraper or a stainless steel scouring pad.
Door handle Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
If descaler comes into contact with the door handle, wipe it off immediately. Otherwi-
se, any stains will not be able to be removed.
Enamel surfaces and
self-cleaning surfaces
The oven is easier to clean when it is still lukewarm.
Remove simple grease splashes with rinsing water.
For stubborn or heavy soiling, use oven cleaner in accordance with the manufacturer‘s
instructions.
Clean thoroughly with clear water and remove all cleaning agents completely.
Glass cover for the interior
lighting
Hot soapy water:
Clean with a dish cloth and then dry with a soft cloth.
If the cooking compartment is heavily soiled, use oven cleaner.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe EB8017ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe EB8017ED in the language / languages: English, German as an attachment in your email.

The manual is 1.54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info