784250
45
Zoom out
Zoom in
Previous page
1/48
Next page
45
ENEN
Installation and connection of the appliance
Installing the appliance
The stability of the furniture must comply with DIN 68930.
On the built-in niche no back wall may be present, so that
the ventilation is ensured.
Push the device all the way into the niche.
Open the oven door and fasten the le and right with the
supplied screws on the cabinet.
Do not overtighten the screws (by hand).
What to do in case of problems?
Warning - Risk of electric shock!
Incorrect repairs are dangerous!
Repairs and the replacement of a damaged power cable
may only be carried out by a certied electrician.
If the appliance is defective, unplug the appliance from
the mains or switch o the circuit breaker in the fuse box.
Contact a certied electrician or the customer service.
The oven doesn’t heat up.
Has the fuse in the domestic installation been triggered?
Have the temperature and heating mode been set correctly
?
The device fuse keeps blowing.
Contact the customer service or a licensed electrician.
Lighting has failed.
To replace the lighting, see corresponding chapter.
The cooking result is not satisfactory.
Have the recipe instructions correctly been followed and
have the application guidelines in this manual been folloed?
KKT KOLBE customer service
Tel. 0049 9502 667930
Mail: info@kolbe.de
www: www.kolbe.de
You can nd further data and documents
on our website at „Questions & Answers“.
Starting up the appliance
Remove all packaging materials and transport protection,
especially from the cooking chamber, and peel o any pro-
tective lm that may be present.
Clean the oven and accessories with a damp cloth
and dry them well.
Set the current time to the timer (see corresponding
chapter).
Heat the empty oven to 200 °C for approx. 30 minutes with
top/bottom heat to burn any production residues on the
surfaces of the oven cavity.
The typical new odour that develops is unavoidable.
Keep the room well ventilated.
Wipe the cooking chamber clean with a damp cloth
and dry it well before use.
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe EB8010ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe EB8010ED in the language / languages: English, German as an attachment in your email.

The manual is 2.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info