784450
117
Zoom out
Zoom in
Previous page
1/128
Next page
53
EN
6.2 Connection to the power supply system
Danger!
Failure to follow the instructions below may result in life threa-
tening electric shock or short circuit:
Disconnect the power supply before installing the dishwasher.
Ensure that proper earthing exists before use and do not,
under any circumstances, cut or remove the earthing connec-
tion from the power cord.
Changes to the power supply and replacement of the socket
may only be carried out by a certi ed electrician.
Caution!
To avoid overheating and burns, do not use an extension cord
or adapter plug with this appliance.
Electrical requirements and power supply
Only connect the appliance to a power supply whose voltage and
frequency match the speci cations on the rating plate.
Provide a separate circuit for connecting the appliance and protect
it with a 10A/13A/16A fuse, a time-delay fuse or a circuit breaker.
Insert the plug into a properly grounded power outlet.
6.3 Positioning of the appliance
!Attention!
Moisture escaping from the appliance (e.g. steam when
opened the door after operation) can damage furniture parts
and surfaces surrounding the appliance.
Protect them adequately against moisture, especially the
underside of the worktop.
Select an installation position for the dishwasher near the exis-
ting inlet and drain hoses and power supply.
Note: Depending on where your electrical outlet is, you may need
to cut a hole in the opposite cabinet side.
Also note the following notes and illustrations:
1Electrical, drain
and water supply
2Space between cabi-
net bottom and  oor
3Dishwasher
4Appliance door
5Cabinet
6Space between appli-
ance door and cabinet
35
6min. 50mm
4
The distance between the top of the dishwasher and
the cabinet should be min. 5mm.
If the dishwasher is installed at the corner of the
cabinet, there should be some space to the side when
opening the door (see illustration).
90°
450mm
2
1
820mm
100mm
80mm
90°
580mm
Installation
117


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe DW4503VI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe DW4503VI in the language / languages: English, German as an attachment in your email.

The manual is 10.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info