784303
57
Zoom out
Zoom in
Previous page
1/64
Next page
57
EN
Installation / Mounting the hood
8.6 Electrical connection
Only connect the appliance to the po-
wer supply once it is properly installed.
If the appliance is not tted with a con-
nector plug, a two-pole switch, confor-
ming to standards with a minimum open
contact gap of 3 mm is to be installed by
an authorized tradesman in an easily ac-
cessible location.
Never install the appliance if the data
on the rating plate (V) does not agree
with your supply voltage.
You will nd the rating plate inside the
appliance, behind the grease lter.
If the extractor hood is tted with a
standard connector plug, connect this
to an easily accessible standard socket.
!
! !
9. Mounting the hood
Note: The ventilation system has
sharp edges. Use safety gloves.
The mounting time is 1-3 hours and
there are 2 people required
for assembly.
Before mounting, all appropriate core
holes for the installation of the ex-
haust hose must be present or made.
Select the installation position so that
the appliance can be easily connected
to the power supply.
To prevent air leakage in exhaust air
mode (i.e. backow of outside air),
install the supplied backow aps in
the air outlet of the motor unit.
Note: This step is not necessary for
recirculation mode or if there is alrea-
dy a backow ap in the exhaust air
system of your kitchen.
Get an exhaust hose ø 150 mm with
two hose clamps (not included!)
57


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe DRAFT865 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe DRAFT865 in the language / languages: English, German as an attachment in your email.

The manual is 1.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info