784436
56
Zoom out
Zoom in
Previous page
1/60
Next page
56
Installation / Technical details
9.6 Electrical connection
!
Do not connect the appliance to the
power supply until it has been properly
installed.
!
Never install the appliance if the data on
the rating plate (V) does not agree with
your supply voltage.
You will nd the rating plate inside the
appliance, behind the grease lter.
If the cooker hood has a standard plug,
connect it to an easily accessible stan-
dard socket.
If the appliance is not tted with a con-
nector plug, a two-pole switch, confor-
ming to standards with a minimum open
contact gap of 3 mm is to be installed
by an authorized tradesman in an easily
accessible location.
9.4 Use as a recirculation hood
This appliance is factory-provided for re-
circulating air operation. For this check
inside the hood that the carbon lters
are attached on the right and le of the
motor unit.
9.5
Mounting the carbon lter
Remove the metal grease lter.
The carbon lter is mounted in two
parts to the right and le of the motor.
Check whether the teeth correspond
to the direction of the rotation of the
respective side.
Turn the activated carbon lter onto
the motor housing (usually clockwise).
Reinsert the metal lter.
(Illustrations may vary)
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe BOX400S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe BOX400S in the language / languages: English, German as an attachment in your email.

The manual is 1.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info