784248
46
Zoom out
Zoom in
Previous page
1/52
Next page
46
Care and cleaning
Care and cleaning
For cleaning, don’t use steam cleaners.
Before cleaning the machine, let it cool down and un-
plug from the mains.
Don’t use abrasive cleaning agents, abrasive scourers
or sharp objects.
Case front
Only use commercially available agents according to the
manufacturer‘s instructions for cleaning and maintenance
of the front surfaces.
Stainless steel surfaces can be cleaned and wiped dry with
mild detergents (eg soap) and a so cloth.
Aggressive cleaning agents (eg vinegar-based cleaners),
abrasives, abrasive grit and sharp objects will damage the
surface of the appliance!
Oven interior
Der Garraum lässt sich leichter reinigen, wenn er noch
handwarm ist.
Remove simple grease splashes with rinse water.
Use conventional oven cleaner for stubborn or severe
soiling. Rinse thoroughly with cold water to remove all
cleaning agents are removed completely.
When using oven sprays, observe the manufacturer‘s
instructions. Painted, anodized, galvanized surfaces, alu-
minum parts and radiators may not come in contact due to
possible damage and discoloration with these sprays.
Clean the accessories such as baking tray, drip pan, grate,
etc. with hot water and a little detergent.
SteamClean method
This function facilitates the oven cleaning essentially, be-
cause the dirt can be solved more easily by water vapor and
heat.
Remove any accessories such as roasting pan, baking sheet
and rust.
Pour down about 0.4 liters of water with a little detergent
into the trough of the soil.
Close the oven door. Select bottom heat heating at 50 °C.
Switch o the appliance aer about 30 minutes and discon-
nect the power. Remove soaked food debris with a cloth.
For baked-on soils, note the previous cleaning instructions.
Removing the oven door
Fold down the oven door to the horizontal position.
Li the bracket on the two door hinges to the front.
Slowly close the oven door until it stops.
Then li the door until the hinges disengage.
The insertion is carried out in reverse order.
At last, swing the lever back to the hinge support.
!
Hinge support Clip
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe BO8810SS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe BO8810SS in the language / languages: English, German as an attachment in your email.

The manual is 1.52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info