Manual KKT Kolbe BASE604S (page 59 of 64) (English, German)

784427

Zoom out

Zoom in

1/64

Mounting the hood

• To prevent air leakage in exhaust air

mode (i.e. backow of outside air),

install the supplied backow aps on

the top of the bonnet in the air outlet.

Note: This step is not necessary for re-

circulation mode or if there is already

a backow ap in the exhaust air duct

of your kitchen.

• Assemble the telescopic exhaust sha

from the two sha elements by sliding

them into each other and place it on

the hood body.

• Pull the inner sharf part upwards

to the desired height and mark the

position of the upper corners adjacent

to the wall for both sha elements

on the wall.

• From the inside of the cooker hood,

mark the positions of the holes in its

back on the wall.

(For this step, open the front ap

of the hood and remove the metal

grease lter).

• Take the hood down, drill holes

at the marked points according to the

diameter of the dowels and carefully

tap one of the other dowels into each

of the drill holes with a hammer.

• Hang the hood back in place and x

its rear side to the wall or dowels with

the additional screws (4.2 × 30 mm)

supplied.

dowels

scews

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe BASE604S in the language / languages: English, German as an attachment in your email.

The manual is 1.4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

KKT Kolbe BASE604S Manual

Product: