784403
60
Zoom out
Zoom in
Previous page
1/68
Next page
60
Installation
3.6 Electrical connection
!
Before connecting the hood, check
that the mains voltage corresponds
to that indicated on the rating plate
xed to the inside of the hood.
Check that the domestic power sup-
ply guarantees adequate earthing.
Only connect the appliance to the
power supply once it is properly
installed.
Connect the hood to the mains
through a two-pole switch having a
contact gap of at least 3 mm.
3.5 Chimney assembly
Lower chimney element
Insert the lower edge of the lower
chimney element (2.1) into the cor-
responding gap on the upper side of
the hood canopy (1).
Place the drill holes at the upper
rear corners of the chimney ele-
ment on the sidewise drill holes of
the small xing bracket (11.2) and
x it with the screws supplied.
Upper chimney element
Push the two sides of the upper
shaft element (2.2) slightly apart
and place them over the lower chim-
ney element (2.1).
Place the drill holes at the upper
rear corners of the chimney ele-
ment on the sidewise drill holes of
the large xing bracket (11.3) and
x it with the screws supplied.
1
2.1
11.2
11.3
2.2 3.7 Before use
After installation, clean the sur-
rounding area thoroughly so that no
dust or construction debris can be
sucked in during initial operation.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KKT Kolbe ANGOLO1005ED at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KKT Kolbe ANGOLO1005ED in the language / languages: English, German as an attachment in your email.

The manual is 1.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info