818896

Kitchenbrothers KB800 Manual

24
Zoom out
Zoom in
Previous page
1/43
Next page
4. Align the outlet port of the tray with the input port of the grinder and install it in
place, as shown in image D.
5. Place a container or bowl near the outlet of the grinding mill.
6. Prepare the (minced) lling and add all desired spices/ingredients. Mix
everything evenly and allow to marinate for some time.
7. Prepare the sausage casing. Place the sausage casing in water before use and tie
a knot at the end. Place the sausage skin over the top of the sausage stuffer.
8. Plug in the power cord.
9. Set the speed knob to the desired gear.
10. Place the meat on the tray and insert it into the feed opening. Use the push rod
to slowly push the meat into the feed opening of the grinder.
11. Gently pull the casing to ll it with the ingredients. When the sausage is the
desired length, pull it tight and tie it with a string.
12. After use, turn the speed knob to position 0 and unplug it.
• The sausage should be hung and dried for a while. It does not need to be dried
completely.
3.6 Making kibbeh
Be careful of the rotating parts of the product when using any other
part!
Neverinsertyourngersorotherbodypartsintothegrinder!
Never use meat with bone. Always remove the bone from the meat
before grinding.
3.6.1 Required parts
3.6.2 How to use
16. 17. 18. 19. 25. 28. 22.
1. Place the spiral shaft in the grinding mill. Place the kibbeh nozzle on the spiral
shaft. Place spiral shaft sealing ring on kibbeh nozzle. Tighten the sealing ring on
spiral shaft, as shown in image A.
2. Remove the front cover, as shown in image B.
3. Press the release button, hold the grinder, connect it to the front coupler and
turn it counterclockwise to the lock position, as shown in image C.
4. Align the outlet port of the tray with the input port of the grinder and install it in
place, as shown in image D.
5. Place a container or bowl near the outlet of the grinding mill.
6. Prepare the (minced) lling and add all desired spices/ingredients. Mix
everything evenly and allow to marinate for some time.
7. Plug in the power cord.
8. Set the speed dial to the desired gear.
9. Place the meat on the tray and insert it into the feed opening. Use the push bar
to slowly push the meat into the feed opening of the grinder.
10. The kibbeh will come out of the nozzle in a hollow shape. Once the kibbeh is the
desired size gently remove it from the nozzle with your hand.
11. The kibbeh will be open on both sides. Gently press one side closed with your
ngers. Carefully ll it with your desired lling and also gently press it closed on
the other side with your ngers.
12. After use, turn the speed dial to setting 0 and unplug it.
13. Place the kibbeh in a plate with breadcrumbs or our so that it does not stick to
each other or to the plate.
3.7 Cookie maker
Be careful of the rotating parts of the product when using any other
part!
Neverinsertyourngersorotherbodypartsintothegrinder!
46 47
English
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kitchenbrothers KB800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kitchenbrothers KB800 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 5.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info