818896
20
Zoom out
Zoom in
Previous page
1/43
Next page
The food must be completely thawed and not frozen when put into the product.
The product is not designed to shred frozen food.
Do not keep blended ingredients in a sealed cup for long periods of time.
Sugars in fruits and vegetables can ferment, build up pressure in the cup and
cause the contents to expand. If you then open or move the cup, the ingredients
may burst/spill out of the cup.
Keep the product away from extreme heat sources or direct sunlight.
Do not drop the product or expose the product to large shocks.
Do not drop the product from a great height and make sure the product cannot
fall off your worktop.
Knife blades are sharp! Handle them carefully and do not touch the cutting
edges to avoid risk of personal injury.
Do not place the product where shock or vibration is common. This may result in
tipping over and/or damage to the product.
Never touch the blade gears and clutch in the base unit with your hands, as they
become hot from blending.
Some parts of the product are made of plastic. This makes them vulnerable to
heat. Do not put hot items on the product.
Avoid contact with moving parts. Keep your hands and utensils away from the
blade when using it. You can use a scraper, but only when the product is not on.
Remove the lid only when the knife is stationary. If you don’t, hot liquid may
splash around and cause personal injury.
Do not ll the product past the max line.
Always make sure the blade and cup/pitcher are perfectly screwed together
before placing the combination in the base unit.
Always make sure the blade is undamaged and the sealing ring is in place.
Make sure the blade is not in contact with hard or sharp objects.
Make sure the nozzle is not blocked. Keep the openings free of blockages,
dust, clothes, etc. Keep your ngers (or other limbs) and hair away from the
mouthpiece when the product is on.
Always place the product on a horizontal, level, stable, heat-resistant and non-
ammable surface.
When you turn on the product, all rotating shafts will always move. Pay close
attention to these rotating parts when using any other part. Make sure that no
body parts, cloths, utensils, etc. come in contact with these rotating parts when
the product is on. This may result in personal injury and damage to the product.
2.4 Electrical
If the power fails during use, turn off the product immediately and unplug the
product.
If the surface of the product is cracked, turn off the product to avoid electric
shock.
Check both power cord and plug regularly for signs of damage or wear, and
if there is any, do not use the product and have the power cord and/or plug
replaced or repaired by authorized service personnel.
Do not immerse the product, power cord or plug in water. If water does get
inside or on the product, turn the product off immediately and contact our
customer service department.
Use and store the product so that the cables cannot be damaged.
To avoid electric shock, do not use the product if you suspect the power cord
or plug is damaged. A damaged power cord or plug should be repaired or
replaced by a professional (an authorized distributor).
Unplug and turn off the product when not in use and before cleaning the
product.
Do not unplug the product by pulling the power cord. This may cause re or
electric shock.
If black smoke comes out of the product, unplug the product immediately. Wait
until the smoke is gone before removing the contents of the product and contact
our customer service department.
Do not leave the cable(s) hanging over the edge of a table or countertop.
Do not place the cable(s) on hot surfaces or near oil.
Do not tuck the cable(s) under rugs or blankets. Never lay the cable(s) in a
walkway.
Do not move the product by pulling the cord or twist the cord.
Before connecting the product, make sure that the mains voltage indicated on
the rating plate matches that of your mains supply.
Make sure you do not trip over the cable(s) and that the cable(s) are not kinked,
twisted, or stuck.
The product is not suitable to be controlled by an external timer or a separate
remote control.
Do not leave the product unattended when in use. If you do not use the product
for a long period of time, turn the product off and unplug it.
Should the system that controls the internal temperature fail, the overheating
protection will automatically turn on and the product will stop functioning.
Unplug the product, let it cool down completely and restart the product.
Do not move the product while it is on. Always turn the product off before
moving or cleaning it.
38 39
English
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kitchenbrothers KB800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kitchenbrothers KB800 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 5.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info