818895

Kitchenbrothers KB799 Manual

26
Zoom out
Zoom in
Previous page
1/43
Next page
1. Place the desired vegetable grater in the cutting grinder, as shown in image A.
2. Remove the front cover, as shown in image B.
3. Press the release button, hold the grinder, connect it to the front coupler and
turn it counterclockwise to the lock position, as shown in image C.
4. Place a container or bowl near the outlet of the grinder.
5. Plug in the power cord.
6. Set the speed dial to the desired gear.
7. Wash the vegetables and cut them into small pieces.
8. Put the cut vegetables into the grinder one at a time.
9. Use the pestle to push the vegetables into the feed opening of the cutting mill,
as shown in image D.
10. After use, turn the speed dial to position 0 and unplug the machine.
4. TROUBLESHOOTING
Problem Cause Solution
Product suddenly
stops working during
operation.
The product may be
running too long or the
ambient temperature
may be too high, causing
the product’s motor
temperature to become
too high. The product starts
the overheat protection
program/automatic
shutdown.
Turn the product off.
Unplug the product and
wait for it to return to room
temperature. Generally,
after 15-30 minutes, the
product has cooled down
and can be started again.
Excessive noise
when the product is
running.
The product makes more
noise in high gear than in
low gear.
Choose the appropriate
gear to stir food according
to the recommendations in
the manual.
The amount of ingredients
is too large, causing the
product to overload.
Reduce the amount of
ingredients.
The voltage is unstable.
If the voltage is unstable,
wait for the voltage to
stabilize before use.
The product is spinning for
a long time.
Stop the product and let it
cool before using it again.
Problem Cause Solution
Product speed
decreases or speed
is unstable.
The room temperature is
low, causing the lubricant in
the shaft to harden.
Remove the mixing bowl
and let the product idle
for 5 minutes to soften the
lubricant and restore speed
stability.
The stirred ingredients are
too hard and too much,
overloading the product.
Reduce the mixing volume
and let the product operate
according to its normal
workload.
The tension has suddenly
dropped.
If the voltage is unstable,
wait for the voltage to
stabilize before use.
The product
oscillates and
vibrates while
spinning.
The non-slip base is off. Make sure the non-slip
base is on it.
The product is not on a
smooth and at surface.
Make sure the product
is on a smooth and at
surface.
The dough is heavy. This is normal when
kneading heavy doughs.
The head cannot
spring back after
placing the splash
screen and mixing
bowl.
The splash screen and
mixing bowl are not
properly mounted.
Unscrew the splash cover
and mixing bowl, and
assemble them correctly in
place.
The dough has
darkened after
turning.
Black powder from the ash
has fallen onto the dough.
Before use, check that the
shaft and attachment are
clean and dry, and that
there is no water or dust on
them.
When kneading
bread dough, dry
dust remains on the
bottom.
The dough is not sufciently
kneaded.
This is normal. Knead the
dough longer so that it
becomes sticky and picks
up the dry dust, or use a
spatula.
The attachments
scrape against the
mixing bowl.
The attachment and/
or mixing bowl are not
properly attached.
Make sure the attachment
and mixing bowl are
securely attached.
50 51
English
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kitchenbrothers KB799 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kitchenbrothers KB799 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 5.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info