819047

Kitchenbrothers KB779 Manual

8
Zoom out
Zoom in
Previous page
1/13
Next page
14 15
Troubleshooting
Problem Solution
The product does not work.
Check that the plug is properly plugged in.
Check that the button (A) has sprung back into place.
Let the product cool down if it is on for more than 6-10 minutes at a time.
The attachments scrape
against the mixing bowl.
Check that the mixing bowl is placed correctly.
Check that the attachments are securely attached.
The lid does not t properly
on the mixing bowl.
Check that the lid is properly placed on the mixing bowl.
Check that the mixing bowl is correctly placed in the product.
The product does not work
at any speed.
Check that the indication on the speed knob matches the speed on the
housing.
Turn the speed knob back to “0” and check again that the product is
working.
The product moves when
it is on.
Check that the non-slip feet are still attached.
Check that the product is placed on an even and stable surface.
When kneading heavy dough, this is normal.
The knob (A) does not
spring back into place after
the mixing bowl and lid are
placed in the product.
Check that the lid is correctly placed on the product.
Check that the mixing bowl is correctly installed.
Maintenance and cleaning
Do not clean the product and accessories with abrasive or harsh detergents.
Housing: Use a clean, damp cloth to clean the outside of the product.
The bowl, whisk, mixing hook and dough hook: These parts are dishwasher safe.
The splatter lid: This part is made of hardened plastic and therefore cannot be put in the dishwasher.
Clean it with warm water and soap.
-
-
-
Storage
Store the product in a clean and dry place. Do not store the device in extreme high or extreme low
temperatures.
-
Clean the food processor and its parts and place it on a rm, level and stable surface.
Turn the knob (2) clockwise to tilt the head of the food processor upward. The arm will raise.
Place the lid on the housing.
Place the mixing bowl in the food processor. Turn the bowl clockwise until it clicks into place.
Select the desired attachment and attach it to the accessory attachment point. Turn the attachment
counterclockwise until it clicks into place.
Put the ingredients into the mixing bowl. Make sure not to put more than 700 gr dry ingredients + 500
gr water in the mixing bowl at the same time. If you are making a heavy dough, do not ll the mixing
bowl more than 2/3.
Turn the knob (2) counterclockwise to tilt the head of the food processor downwards.
Plug in the power cord.
Turn the speed knob (3) to the desired speed (1 - 6 ) depending on the attachment you are using.
Turn the knob to “PULSE” and hold it there to turn on the pulse function. Turn the pulse function off by
releasing the knob. The knob will then automatically turn to the “0” position.
Once you have nished mixing, turn the speed knob (3) back to the “0” position.
Turn the knob (2) clockwise to tilt up the head of the food processor.
Remove the mixture from the bowl and off the attachment with the pan scraper or a spatula.
Make sure the food processor is off. Turn the bowl counterclockwise to loosen it and remove the bowl.
Remove the attachment. Clean the bowl and attachment.
Notes
If you use the food processor too long in a row, the motor will automatically turn off. Let the blender
cool down for at least 10 minutes. Note: If this occurs, unplug it for a few minutes to allow the protec-
tion to reset itself and set the speed selector switch to 0. If you do not unplug the power cord for a
moment and set the switch to 0 rst, the motor will not be able to turn on.
As long as the arm is folded up, you cannot turn on the motor. If you ip the arm up while the motor is
running, the safety switch will immediately turn off the motor. After this, you can only turn on the motor
again by rst folding the arm back down and also rst setting the speed selector switch back to 0. After
this, you can reset the speed and use the food processor as normal again.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
-
-
How to use
Service and warranty
If you need service or information regarding your product, please contact our Customer Support at
service@kitchenbrothers.nl.
We provide a 2-year warranty on our products. To obtain service during the warranty period, the product
needs to be returned with a proof of purchase. Product defects have to be reported within 2 years from
the date of purchase. This warranty does not cover damages caused by misuse or incorrect repair; parts
subject to wear; defects that the customer was aware of at the time of purchase; damages or defects
caused by customer neglect; damages or defects caused by third parties.
-
-
Disposal - recycle
Think about the environment and contribute to a cleaner living environment! This product is subject to
the European Directive (EU) 2012/19/EU. At the end of its service life, do not dispose of the product with
normal household waste, but deliver it to a collection point designated by the authorities for recycling.
-
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kitchenbrothers KB779 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kitchenbrothers KB779 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 2.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info