818287

Kitchenbrothers KB761 Manual

27
Zoom out
Zoom in
Previous page
1/120
Next page
27
English
3.2 Operation
1. Insert the plug into the socket.
2. Open the lid, remove the ice container and pour water into the water reservoir.
Use as cold water as possible and make sure the water does not exceed the MAX
line. Place the ice container back in the machine.
3. Press ON/OFF on the control panel to turn the machine on.
4. Press SELECT to set the size of the ice cubes. If the room temperature is below
15°C, it is recommended to select small ice cubes to prevent ice from sticking
together.
5. The ice making cycle takes about 6 to 13 minutes, depending on the size of the
ice cubes and the room temperature. Ice cubes may take a little longer the rst
few rounds because the water in the reservoir still needs to be completely cooled.
The recommended room temperature is 10°C to 32°C.
6. ADD WATER: If there is not enough water in the machine, the machine will
automatically turn off and the ADD WATER indicator light will ash. Press ON/
OFF and rell water in the water tank up to the MAX line. Press ON/OFF again to
turn the machine back on. Let the refrigerant rest in the compressor for at least 3
minutes. Then press ON/OFF to start again.
7. ICE FULL: When the ice container is full, the ICE FULL indicator light comes on.
Remove the ice from the ice container. Press and hold the SELECT button for 5
seconds to make ice again.
8. After use, open the drain plug under the product and drain the water from the
product on a suitable surface.
9. Then dry the product thoroughly with a clean, dry cloth.
Note
◊The sensor for ICE FULL does not work properly when direct sunlight shines on
it. If the unit does not stop even if ice cubes block the sensor, move the unit to a
place where there is no sunlight.
3.3 Tipps for use
• Using pure or distilled water is recommended to make more transparent ice cubes
and extend the life of the product.
• Place the product on your countertop in a cool and ventilated place. This will
signicantly improve the production capacity of ice cubes.
• Change the water in the water reservoir at least every 24 hours. This will prevent
blockages in the machine.
• Pay attention to the temperature of the water you add. If you add too hot water,
the rst few rounds will be slightly less effective at making ice cubes. After one or
two rounds, the water temp will drop and production will improve.
• If the ambient temperature is too high, you can close the lid to keep the ice cubes
at temperature.
• Ice cubes cannot be kept in the product for a long time. To prevent the ice cubes
from melting, place them in the freezer. If necessary, store the ice cubes in a
freezer bag in the freezer so they are easier to separate.
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kitchenbrothers KB761 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kitchenbrothers KB761 in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 2.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info