18
Manual Clean, Water Filter
If the ice production is disabled for long period, the water circuit is automatically cleaned. Nevertheless, in
particular cases, it is possible to manually intervene and perform a supplementary cleaning.
Repeat the operation until the water is clean.
How to manually clean the filter
Correctly position the ice tray or another suitable container under the IceMaker to collect
water, then close the drawer. At the end of the operation, wash the tray.
Select the Menu button and used the Up/Down button to select
TriMode Options
The freezer compartment can, if required, be converted to the refrigeration o Dynamic 0° operating mode.
How to set the Fridge function
How to set the Dynamic 0° function
How to revert to the Freezer function
Default Setting
This offers the possibility to reset default factory settings and cancels any previous changes.
How to reset default settings
ATTENTION: If the default settings are restored, it is necessary to reactivate the choice of operation of
the Multi-temperature compartment in case it was previously set as Fridge or Dynamic 0°.
Basic settings of the Menu
