12
Your KitchenAid wine cabinet has been designed to be flexible. It can be adapted to your requirements and be
modified in terms of storage:
Various storage methods
Universal storage shelf Universal sliding shelf
Capacity: 77 bottles Capacity: 12 bottles
Max. weight:100 kg (13 Bordeaux bottles)
Advice on arranging your wine cabinet
Your KitchenAid wine cabinet has been designed to store a maximum number of bottles in total safety. We
recommend that you abide by the following few suggestions in order that the maximum storage capacity can be
obtained.
• Make sure that you distribute your bottles as evenly as possible onto the various shelves contained in your
cabinet so as to spread the weight equally. Also take care that your bottles do not touch the cabinet’s rear
wall.
• Make sure you distribute your bottles evenly throughout the height of the wine cabinet (avoid loading all
bottles at the top or all bottles at the bottom).
• Be sure to observe the storage recommendations in accordance with the type of storage facility provided by
your cabinet. Never stack more than one layer of bottles on a sliding shelf.
• If you have sliding shelves, for easy day to day access it is a good idea to place them in the upper part of your
wine cabinet.
• For this reason, place one or two bottles of each of your various wines on the sliding shelves and
your reserve stock on the storage shelves. Then all you have to do is top them up as required.
• When using your wine cabinet, never pull out more than one sliding shelf at a time.
WARNING: Never modify the position of your wine cabinet’s bracing bar (see description) and never
manoeuvre this part when the cabinet is stocked.
Adding sliding shelves
When you purchase your wine cabinet, the dimensions of the sliding shelves have been adjusted so that they fit
perfectly into the interior of your cabinet. In the event you want to purchase another sliding shelf take contact
with the KitchenAid Service Center, if necessary, you can adjust it yourself. To do this, loosen the right and left
screws of the first slider (2 screws), then adjust the slide to the width required and retighten the screws. Repeat
the procedure for the second slider (if required):
Arrangement and storage
Adjusting screw
Slider
Slider
Adjusting screw
Slider
