5
Declaration of conformity
• This appliance has been designed for preserving food and is manufactured in compliance with
Regulation (CE) No. 1935/2004.
• This appliance has been designed, manufactured and marketed in compliance with:
- safety objectives of the “Low Voltage" Directive 2006/95/CE (which replaces 73/23/CEE and
subsequent amendments);
- the protection requirements of Directive “EMC" 2004/108/EC.
Electrical safety of the appliance can only be guaranteed if it is correctly connected to an approved
earthing system.
Safeguarding the environment
Failure to follow the instructions regarding sanitizing can compromise the hygienic safety of the
water dispensed.
• When using the appliance for the first time and every time the filter is changed, discard the first 9-14
litres of water, equivalent to 6-7 minutes of dispensing (not necessarily consecutive, but before initial
consumption) and discard the ice produced in the first 24 hours.
• If the water dispenser has not been used for more than 4/5 days, it is advisable to clean the circuit and
run off the first litre of water.
• Reposition the removable water dispenser (if present), ensuring your hands are hygienically clean.
• Clean the ice bucket or drawer regularly but using only drinking water.
• The filter must be changed when indicated on the control panel or when the ice/water dispenser has
not been used for more than 30 days.
• Every time the filter is changed, it is a good idea to always sanitise the water dispensing system with
food-grade disinfectant solutions (sodium hypochlorite based) which do not alter the characteristics of
the materials. Rinse with at least 2 litres of water before use.
• Only original spare parts supplied by the manufacturer should be used when replacing components in
the ice and water dispenser.
• Any work on the appliance must be carried out by a qualified technician or the After-sales Service.
Cleaning, sanitization and maintenance of the ice
and/or water dispenser (if present)
