Setting the language
To change the display language, proceed as follows:
• Press the MENU button (B2) to access the menu and then buttons (B5) and (B6) to select
LANGUAGE.
• Press (B7).
• Press buttons (B5) and (B6) until the required language is displayed.
• Press (B7) to confirm.
• Press the MENU button (B2) to exit the menu.
Rinsing
This function is used to obtain hotter coffee. Proceed as follows:
• If, when you turn the machine on, you select a small cup of coffee (less than 60ml), use the hot water
from the rinse cycle to pre-heat the cup.
• If, on the other hand, more than 2/3 minutes have elapsed since the last coffee was made, pre-heat the
brewing unit before making any more coffee. To do so, press the MENU button (B2) to access the
menu; the display shows the message RINSING. Press (B7). The display shows 'OK' TO
CONFIRM. Press the button (B7) again. Let the water run into the drip tray below or use it to fill
(and then empty) the cup to be used for coffee, thus warming it.
Changing the duration of operation
The appliance is factory-set to switch off automatically after 30 minutes of inactivity. To change this time
(max 120 min.), proceed as follows:
• Press the MENU button (B2) to access the menu and then buttons (B5) and (B6) until the
display shows the message AUTO-OFF.
• Press (B7) to confirm.
• Press buttons (B5) and (B6) to set the period of time after which the appliance must switch off
(30 minutes, 1 hour, 2 hours).
• Press (B7) to confirm.
• Press the MENU button (B2) to exit the menu.
Setting the clock
• Press the MENU button (B2) to access the menu and then buttons (B5) and (B6) until the
display shows the message ADJUST TIME.
• Press (B7).
• To set the hours, use buttons (B5) and (B6
) then press (B7) to confirm.
• To set the minutes, use buttons (B5) and (B6) and then press (B7) to confirm.
• Press the MENU button (B2) to exit the menu.
Setting automatic start time
This function allows you to set the machine to switch on automatically at a time of your choosing.
• Make sure the appliance clock has been set.
• Press the MENU button (B2) to access the menu and then buttons (B5) and (B6) until the
display shows the message AUTO-START.
• Press (B7).
• The machine displays the message AUTO-START ENABLE?
• Press (B7) to confirm.
• To set the auto start time, use the buttons (B5) and (B6) then press (B7) to confirm.
• To set the minutes, use buttons (B5) and (B6) and then press (B7) to confirm.
• Press (B7), the display shows AUTO-START ENABLED.
Changing the coffee temperature
To change the temperature of coffee run off, proceed as follows:
• Press the MENU button (B2) to access the menu and then buttons (B5) and (B6) until the
display shows the message COFFEE TEMPERATURE;
• Press (B7).
• Press buttons (B5) and (B6) to select the required coffee temperature: low, medium, high.
• Press (B7) to confirm the temperature chosen.
• Press the MENU button (B2) to exit the menu.
18
