Preliminary steps
Transport check
After unpacking the appliance, check that it is undamaged and that all the accessories are present and
correct. Do not use the appliance is there is any visible damage. Contact the After-sales Service.
Installing the appliance
Critical safety warnings
• Installation must be carried out by a qualified technician in accordance with local
regulations (see chapter BUILT-IN INSTALLATION).
• Keep the packaging material (plastic bags, polystyrene parts, etc.) out of the reach of
children.
• Under no circumstances should the appliance be installed in rooms where the
temperature may drop to 0°C.
• Adjust the water hardness setting as soon as possible, following the instructions in
chapter BUILT-IN INSTALLATION.
Connecting the appliance
Make sure that the voltage indicated on the rating plate on the
underside of the machine corresponds to the domestic power
supply voltage.
Connect the machine to a professionally installed power socket having a current rating of at least 10A and
an efficient earth connection. If the appliance plug and socket are incompatible, have an electrician replace
the socket with one of a suitable type. Observance of safety directives requires that a multi pole switch
with a minimum contact gap of 3mm be used for the installation. Do not use multiple plug adapters or
extension cords.
The mains power supply must have electrical disconnect devices in
compliance with national installation standards.
If the power cable or plug are damaged, to avoid any risk have them replaced only by the After-Sales
Service.
WARNING:
WARNING:
WARNING:
6
Electrical appliances must not be disposed of as general household waste. Appliances marked with
this symbol fall under European Directive 2002/96/CE. Electrical and electronic appliances must
not be disposed of as household waste, but delivered to an authorized collection centre for
scrapping. Correct scrapping of the appliance after its working life prevents damage to the environment
and potential health hazards. For further information on the scrapping of the appliance, contact your local
authority, the waste disposal service or the shop where you purchased the product.
Scrapping
This appliance conforms to the following EC directives:
• Low Voltage Directive 2006/95/EC and subsequent amendments.
• Directive EMC 2004/108/EC and subsequent amendments.
The materials and articles intended to come into contact with foodstuffs conform to the requirements of
European regulation (EC) N°1935/2004.
Declaration of conformity CE