- Do not use steam cleaners.
- Before cleaning, make sure the cooking zones are switched off and that the residual heat indicator
(“H”) is not displayed.
IMPORTANT: Do not use abrasive sponges or scouring pads. Their use could eventually ruin the glass.
• After each use, clean the hob (when it is cool) to remove any deposits and stains due to food residuals.
• Sugar or foods with a high sugar content damage the hob and must be immediately removed.
• Salt, sugar and sand could scratch the glass surface.
• Use a soft cloth, absorbent kitchen paper or a specific hob cleaner (follow the Manufacturer’s
instructions).
WARNING
15
Cleaning
• Read and follow the instructions given in the section “Instructions for use”.
• Check that the electricity supply has not been shut off.
• Dry the hob thoroughly after cleaning it.
• If, when the hob is switched on, alphanumeric codes appear on the display, consult the following table
for instructions.
• If the hob cannot be switched off after using it, disconnect it from the power supply.
Troubleshooting guide
ERROR CODE DESCRIPTION POSSIBLE CAUSES
ERROR
ELIMINATION
C81, C82 The control panel
switches off because of
excessively high
temperatures
The internal temperature
of electronic parts is too
high
Wait for the hob to cool
down before using it
again.
F42 or F43 The connection voltage
is wrong
The sensor detects a
discrepancy between the
appliance voltage and
that of the mains supply
Disconnect the hob from
the mains and check the
electrical
connection
F12, F21, F25, F36,
F37, F40, F47, F56,
F58, F60
Call the After-Sales Service and specify the error code
