611496

KitchenAid KEIPP 12020 Manual

11
Zoom out
Zoom in
Previous page
1/20
Next page
11
8. Hook the truss on the 4 screws (see step 8).
WARNING: the side of the truss with electrical connection box corresponds to the side of the
control panel with hood assembled.
9. Tighten firmly the 4 screws.
10. Insert and tighten firmly another 2 screws in the remaining free holes for secure fixing.
Note - only for Extraction version: connect the upper end of the exhaust duct to the outdoor
exhaust device (e.g.: hole on the ceiling).
11. Fix the reinforcement bracket (see step 3) to the truss in a position as intermediate as possible. Carry
out the electrical connection to the mains power supply, only turn on the power supply with
assembly completed.
12. Fix the hood to the truss with 8 screws.
WARNING: the side of the truss with electrical connection box corresponds to the side of the
control panel with hood assembled.
13. Carry out the electrical connection of control panel and the lamps.
Position the power cable in its housing and secure the cable to the cable clamp (13a).
Note: hook the excess cable to the appropriate cable glands (fitted with screw for tightening).
14. Join the two top sections of the flue to cover the truss so that one of the slots on the sections is situated
on the same side of the control panel and the other on the opposite side.
Screw the two sections with 8 screws (4 each side - see the plan diagram for joining the two sections).
15. Fix the top flue assembly to the truss, near the ceiling, with 2 screws (one each side).
16. Join the two bottom sections of the flue covering the truss using 6 screws (3 each side - also see the plan
diagram for joining the two sections).
17. Insert the bottom section of the flue in the special seat to completely cover the motor compartment and
electrical connection box.
18. Apply the 2 tabs (supplied) to cover the fixing points of the bottom flue sections (IMPORTANT! IT IS
EASY TO RECOGNIZE THE LOWER FLUE TRIMS AS THEY ARE NARROWER AND LESS
DEEP).
The wider and deeper trims are those used for the upper flue, and they must be cut to size. Refit the
grease filter and the perimeter extraction panel.
Turn the mains power on again at the central electrical panel and check for correct hood operation.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KitchenAid KEIPP 12020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KitchenAid KEIPP 12020 in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of KitchenAid KEIPP 12020

KitchenAid KEIPP 12020 User Manual - German - 20 pages

KitchenAid KEIPP 12020 User Manual - Dutch - 20 pages

KitchenAid KEIPP 12020 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info