8
3. Filling the salt reservoir
When water hardness is set, it is required to fill salt reservoir
with water and special regeneration salt. As a first step it is
needed to fill reservoir with 1.5 litres of fresh water. Confirm
operation by pressing button.
SALT RESERVOIR
|>||= DONE
SALT IN THE
|>||= DONE
ADD 1KG OF
|>||= DONE
INSERT SALT
OPERATION
INSERT 1,5L OF
|>||= DONE
SALT RESERVOIR
|>||= DONE
WATER IN THE
|>||= DONE
POUR WATER
OPERATION
4. Detergent type operation
DETERGENT?
P =NO, |>||=YES
DO YOU USE
P =NO, |>||=YES
“ALL IN ONE”
P =NO, |>||=YES
DETERGENT TYPE
OPERATION
Unscrew cap. Fill the salt reservoir
with water.
Add 1kg of special
regeneration salt
dedicated only for
dishwashers. Other kind
of salt cannot be used.
Salt residue around the cap needs to be removed. Residual saline solution or grains of salt can lead to
deep-down corrosion, irreparably damaging the stainless steel components.
In this step it is very important to choose what type of
detergent will be used (tablet/capsule or gel/powder).
If you prefer to use multiphase detergent in tablet or capsule
for washing - press , then go to step 6. Open tap
operation on the next page.
The symbol on display will be lit.
If you prefer to use gel or powder detergent for washing -
press , then go to step 5. Rinse aid operation.
Screw on the cap.
