611365
23
Zoom out
Zoom in
Previous page
1/32
Next page
23
Installation and connection information
DISHWASHER CAVITY MEASUREMENTS
DISHWASHER MEASUREMENTS
*With nut and sliding protection mounted
**Recommended measurements
WATER CONNECTION
The machine can be connected to a cold or hot
water supply (maximum 85°C). However, we
recommend connection to a cold water supply.
The inlet pipe has a connector with either a 1/2"
internal thread.
ELECTRICAL CONNECTION
220-230VAC mains voltage, minimum 13A
DRAINAGE
The supplied cone-shaped connection pipe fits a
drainage connection with an internal diameter
of 13, 16, 18 and 22 mm.
Use a hose clamp if connecting to a fixed drain
(sink).
The connector is ready to cut to the desired drain
connection size. Only a clamp is required.
CABLE/HOSE LENGTHS
Drainage hose: 1930 mm
Supply hose: 1670 mm
Power cable: 1770 mm
TOOLS
1) Flathead screwdriver
2) Open-ended spanner 16 mm
3) Tape measure
4) Spirit level
Step 1. Fitting the dishwasher in place
1. Loosen the locking nuts on the dishwasher's
two front steel feet using a 16 mm open-ended
spanner. Screw the locking nuts down as close
to the floor as possible.
2. Adjust the height of the dishwasher by turning
the front steel feet with your hands. Leave
enough space to adjust them later.
Make sure the
edges of the
cable hole are
even so as not
to damage the
drainage and
supply hoses
and the
electric cable.
Cable hole
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KitchenAid KDFX 7015 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KitchenAid KDFX 7015 in the language / languages: English as an attachment in your email.

The manual is 2,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of KitchenAid KDFX 7015

KitchenAid KDFX 7015 User Manual - German - 32 pages

KitchenAid KDFX 7015 User Manual - French - 32 pages

KitchenAid KDFX 7015 Installation Guide - All languages - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info