6
Options and display description
Before using the appliance for the first time
carefully read this quick reference guide and
the assembly instructions!
The control panel of this dishwasher activates
pushing any button except cancel/off button.
For energy saving the control panel
deactivates automatically after 30 seconds if
no cycle has started.
Operation Indicator
A LED light projected on the floor indicates
that the dishwasher is working.
Program selection button
Push “P” button (repeatedly) until selected
program number is shown on the display (P1...Px)
- see “Table of programs” - next page).
Start/resume button
Push this button to start the selected program: the
indicator lights up and goes off at the end of the
program. When the door is opened during a
washing cycle, the cycle is temporarily paused: the
Start indicator blinks. To resume the cycle push
Start button and close the door within 3 seconds.
Cancel/off button
Push this button to switch off the control panel. If
pressed when a program is running it cancels the
program ongoing draining water for 1 minute
(0:01 is shown into the display). If pressed when
the dishwasher is switched off, it drains any
possible liquids from dishwasher (1 minute
process).
Salt indicator
When lit (at the end of the cycle), the salt reservoir
needs to be refilled.
Rinse aid indicator
When lit (at the end of the cycle), the rinse aid
dispenser needs to be refilled.
Wash time display
Indicated the cycle duration and the remaining time
(h:min). With “Delayed start” selected it indicates
the time remaining until program start (h.00) -
below 1h (0:min). If “Fx Ey” messages appears on
the display, see page 17 - chapter “What to do
if...”.
Delayed start button
Push the button (repeatedly) to delay the start of
the program. Adjustable from 1 to 24 hours. With
each press of the button, the delayed start
indicator increases by one hour and after 24
restarts from 0. Then press the START button.
The dishwasher will start after the set time.
Tablet setting
This setting allows to optimize the cycle
performances according the type of detergent
used. Push the Tablet button for 3 seconds (until
the indicator lights up) if you are using the
combined detergents in tablet (rinse aid, salt and
deteregent in 1 dose). If you are using powder
detergent or liquid detergent, the Tablet indicator
on the control panel has to be off.
Multizone
Allows you to choose the washing zones. Press this
button (repeatedly) to select the wash zones:
both racks
only lower rack
only upper rack (including cutlery rack)
- indicator lits
Dynamic clean
Thanks to the additional power jets this option
provides a more intensive and powerful wash in
the lower rack, in the specific area. This option is
recommended for washing pots and casseroles
(see page 14). Press this button to activate
Dynamic Clean (the indicator lights up).
For non Dynamic Clean loading to achieve best
cleaning performances and resources optimization,
Dynamic Clean should be switched off.
