Fig. 2
• Attach the perforation layout to the wall (5).
• Attach the 2 brackets to the wall using 2 screws
and 2 plugs (6) for each one.
• Hang the hood on the brackets (7).
• Adjust the distance (8) and horizontal position (9)
of the hood, using the specific screws.
• From inside and, from the outside of the hood,
mark the holes for the final fitting (10).
Note: see layout of the back of the hood with
the final position of the holes/plugs/screws
(Fig. 2.1).
• Remove the hood (11).
• Make the holes and insert the plugs in the
previously marked points (12).
• Assemble the bracket for the chimney flue using
the 4 screws supplied (13).
Note: the extension of the chimney flue bracket
must be identical to the internal width of the
chimney flue. Attach the bracket to the wall with
2 plugs and 2 screws (14).
• Hang the hood again on the brackets (15).
• Fit the hood securely (16).
Note: see assembly operations 10-12 for the
number and position of the screws.
Installation
8
