7
The appliance does not work:
• Check the domestic power supply and ensure
the appliance is connected to the mains
properly.
• Switch the hood off and then on again to see if
the problem has been resolved.
The hood is not extracting satisfactorily:
• Check the extraction speed is set to the desired
level;
• Check the filters are clean;
• Check the air vents are not blocked;
The light does not work:
• Check to see if the lamp needs replacing;
• Check to see if the lamp has been fitted
properly;
Troubleshooting guide
Before calling the After-sales Service:
1. See if you can solve the problem yourself with
the help of the “Troubleshooting guide”.
2. Switch the hood off and then on again to see if
the problem has been resolved.
If, after the above checks, the problem
persists, contact your nearest After-sales
Service.
Always provide:
• a brief description of the problem;
• the type and specific model of the appliance;
• the Service number (this is the number which
follows the word SERVICE on the dataplate),
inside the appliance. The Service number is also
printed on the warranty booklet;
• your full address;
• your telephone number;
If any repairs are needed, contact an authorized
Service Centre (to ensure that only original spare
parts are used and that repairs are made correctly).
After-sales Service
- Do not use steam cleaners.
- Disconnect the appliance from the power
supply.
IMPORTANT: Do not use corrosive or
abrasive detergents. If any of these products
accidentally comes into contact with the
appliance, clean it immediately with a damp
cloth.
•Clean the surfaces with a damp cloth. If very
dirty, add a few drops of washing up detergent to
the water. Dry with a dry cloth.
IMPORTANT: Do not use abrasive sponges or
metallic scrapers or scouring pads. Their use
could eventually ruin the enamelled surfaces.
•Use specific detergents to clean the appliance and
follow the manufacturer’s instructions
IMPORTANT: Clean the filters at least once a
month to remove built-up oil and grease.
WARNING:
Cleaning
