581385

KitchenAid 730-0826 Manual

26
Zoom out
Zoom in
Previous page
1/37
Next page
Hood Lights
The grill must be plugged in for the hood lights to work. See
“Plug in Grill” in the “Freestanding Outdoor Grill Installation”
section.
To Use:
Press the LIGHTS button on the control panel to turn the
hood lights on and off.
Using Your Infrared Sear Burner
Infrared grilling produces intense heat which quickly sears
the meat. Searing locks in flavor and juices while allowing
the outer surface to absorb smoke and food aroma that is
produced as grease and drippings are vaporized by the
burner. The result is a crisp, flavorful outside with a tender,
juicy inside.
■ Preheat the infrared sear burner for 5 minutes.
■Ensure that meats are fully thawed and that all excess fat
is trimmed away prior to grilling.
■Leave the burner set to On when placing food on the grill
to sear.
■ Use the sear burner to sear meat 1 to 2 minutes on each
side, then move the meat to the main grill cooking surface
to finish grilling to the desired doneness.
Manually Lighting the Infrared Sear Burner
1. Open the infrared sear burner cover. Do not light burners with
the cover on.
2. Do not lean over the grill.
3. Remove the manual lighting extension (see following
illustration) and attach a match to the split ring.
4. Strike the match to light it.
5. Hold the lit match close to the infrared sear burner.
IMPORTANT: It is recommended that the sear side burner lid
be raised when the burner is in use to eliminate the possibility
of increased lid and handle temperatures.
Lighting the Infrared Sear Burner
1. Remove the infrared sear burner cover. Do not light
burners with the cover on.
2. Do not lean over the grill. Make sure control knobs are
turned to OFF. The sear burner grease tray must be in
place.
3. Push in and turn the control knob to IGNITE/ON and hold
in. You will hear the “snapping” sound of the spark. When
burner is lit, release the knob. Turn knob to desired setting.
IMPORTANT: If burner does not light immediately, turn the
burner knob to OFF and wait 5 minutes before relighting.
6. Push in and turn the burner knob to IGNITE/ON for the burner
closest to the lit match. The burner will light immediately.
When burner is lit, turn knob to desired setting.
7. Repeat steps 3 through 6 for each burner.
8. Remove match and replace manual lighting extension on the
right side panel.
IMPORTANT:
If burner does not light immediately, turn the burner knob to OFF
and wait 5 minutes before relighting.
If any burners do not light after attempting to light them manually,
contact the Customer Service Center. See the “Assistance”
section.
26
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KitchenAid 730-0826 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KitchenAid 730-0826 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info