581382
23
Zoom out
Zoom in
Previous page
1/93
Next page
Using Your Searing Side Burner
Infrared grilling produces intense heat which quickly sears the
meat.
Using Your Searing Side Burner
Infrared grilling produces intense heat which quickly sears the
meat. Searing locks in flavor and juices while allowing the outer
surface to absorb smoke and food aroma that is produced as
grease and drippings are vaporized by the burner. The result is a
crisp, flavorful outside with a tender, juicy inside.
1. Preheat the infrared sear burner for 5 minutes.
2. Ensure that meats are fully thawed and that all excess fat is
trimmed
away prior to grilling.
3. Leave the burner set to HI when placing food on the grill to sea
4. Use the sear burner to sear meat 1 to 2 minutes on each side,
then move the meat to the main grill cooking surface to finish
grilling to he desired doneness.
IMPORTANT: It is recommended that the sear side burner lid be
raised when the burner is in use to eliminate the possibility of
increased lid and handle temperatures.
1. To close the searing side burner lid, first lift up the lid to release
the lock then lower it to the closed position.
1
2
Lighting the Searing Side Burner
1. Remove the searing side burner cover. Do not light
burners with the
cover on.
2. Do not lean over the grill.
3. Push in and turn the control knob to IGNITE/ON and hold
in. You
will hear the “snapping” sound of the spark. When burner is
lit, release the knob. Turn knob to desired setting.
Manually Lighting the Searing Side Burner
1. Remove the searing side burner cover. Do not light
burners with the
cover on.
2. Do not lean over the grill.
3. Remove the manual lighting extension (see following
illustration)
and attach a match to the split ring.
4. Strike the match to light it.
IMPORTANT: If burner does not light immediately, turn the burner
knob to OFF and wait 5 minutes before relighting.
5. Hold the lit match close to the searing side burner.
6. Push in and turn the burner knob to IGNITE/ON for the burner
closest to the lit match. The burner will light immediately. When
burner is lit, turn knob to desired setting.
7. Repeat steps 3 through 6 for each burner.
8. Remove match and replace manual lighting extension on the
right side panel.
IMPORTANT:
If burner does not light immediately, turn the burner knob to OFF
and wait 5 minutes before relighting. If any burners do not light
after attempting to light them manually, contact the Customer
Service Center. See the “Assistance” section.
23
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KitchenAid 730-0709C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KitchenAid 730-0709C in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 5,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info