581367
21
Zoom out
Zoom in
Previous page
1/97
Next page
Change Grill Main Burner Valve Orifices
1. Remove the grates and flame tamers.
2. Remove the 1 screw (A) and cotter clip (B) that hold the
burner in place. Set the screw and clip aside. Remove the
burner from the grill by lifting the burner out.
1. A combination of pipe fittings must be used to connect
the grill to the existing gas line.
The 10 ft (3.0 m) PVC flexible gas supply hose design
certified by CSA must be used.
Pipe-joint compounds suitable for use with Natural gas
must be used Do not use Teflon®+ tape
Make Gas Connection
B
must
be
used
.
Do
not
use
Teflon®+
tape
.
There must be a certified manual shut-off valve on the
gas supply line near the grill for easy access.
2. Use a pipe wrench to connect the brass connector on
one end of the 10 ft (3.0 m) PVC flexible gas supply hose
to the Natural gas pressure regulator.
3. Connect the quick connector on the other end of the 10
ft
(
3.0 m
)
PVC flexible
g
as su
pp
l
y
hose to the ri
g
id
A
A. Screw
B Cotter Clip
() gppy g
Natural gas supply pipe. To use the quick connect fitting;
pull the head of the quick connect back, insert the end of
the PVC gas hose and release the head of the connector.
Check the connection and make sure it is secure.
A
3. Use a 6 mm socket and wrench or 6 mm nut driver to
remove the LP brass orifice from the end of each gas
valve. The NG orifice is located behind the LP orifice, so
no additional orifice needs to be installed.
B
.
Cotter
Clip
B
D
C
A. Main burner orifice
A
®Teflon is a registered trademark of E.I. Du Pont De
Nemours and Company.
A. Manifold
B. Right side panel
C.10 ft. (3.0 m) PVC gas hose
D. Natural gas pressure regulator/hose assembly
IMPORTANT: Check that the orifice is properly installed
inside of the burner opening.
4. Reinsert the burner and reattach using the screw and
cotter clip previously removed. Repeat the procedure
for each main burner.
5. Position the igniters so they are 1/4" (6.0 mm) away
from each burner.
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KitchenAid 720-0787D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KitchenAid 720-0787D in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 6,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info