611224

KitchenAid 5KSB1585 Manual

18
Zoom out
Zoom in
Previous page
1/276
Next page
18
WARRANTY AND SERVICETROUBLESHOOTING
Blender does not operate when a setting is selected
All indicator lights are flashing alternately.
The Blender may be jammed. If it is
jammed, the Blender will stop running to
avoid damage to the motor. Press POWER
( )
to reset the Blender and unplug the
power cord. Remove the pitcher assembly
from the base and, with a scraper, free
the blades by breaking-up or removing the
contents at the bottom of the pitcher.
No indicator lights are lit.
Check to see if the Blender is plugged
into a grounded outlet. If it is, press
POWER
( )
; then unplug the Blender.
Plug it back in to the same outlet, and
Press POWER
( )
. If the Blender still
does not work, check the fuse or circuit
breaker on the electrical circuit the
Blender is connected to and make sure the
circuit is closed.
All indicator lights are flashing
at the same time.
The Blender may be overloaded. If the
Blender becomes overloaded when blending
heavy ingredients, it will automatically shut
off to avoid damage to the motor. Press
POWER ( ) to reset the Blender and unplug
the power cord. Remove the pitcher assembly
from the base and divide contents into
smaller batches. Adding liquid to the pitcher
may also reduce the load on the Blender.
If the problem cannot be fixed with the steps provided in this section, contact an authorized
service center (see “Warranty and service” section).
Blender stops while blending
One indicator light is flashing alternately.
If the Blender is plugged in, but will not start
and one light is flashing alternately from all
the other indicator lights, the Blender may
have a stuck key. Press POWER ( ) to turn
off the Blender; then unplug the Blender.
Plug
the Blender back in and press POWER
( )
to turn back on to reset the stuck key.
All indicator lights are flashing at the
same time.
If the Blender is plugged in, but nothing
happens when POWER
( )
is pressed, and
all indicator lights are flashing, the motor
rotor may be locked. Press POWER
( )
;
then unplug the Blender. Plug it back in;
then press POWER
( )
and select the
desired speed.
IMPORTANT: The Blender will not operate at any speed unless the POWER
( )
button is
pressed first.
W10724234B_01_EN.indd 18 10/8/14 3:36 PM
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for KitchenAid 5KSB1585 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of KitchenAid 5KSB1585 in the language / languages: All languages as an attachment in your email.

The manual is 41,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of KitchenAid 5KSB1585

KitchenAid 5KSB1585 User Manual - English - 16 pages

KitchenAid 5KSB1585 User Manual - German - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info