137022
35
Zoom out
Zoom in
Previous page
1/39
Next page
261
english
THIS PRODUCT UTILIZES A LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIATION
EXPOSURE IF THIS PRODUCT IS USED INCORRECTLY. BE SURE TO FOLLOW THESE DIRECTIONS
FOR PROPER USE. DO NOT OPEN COVER AND DO NOT REPAIR OR SERVICE YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
Using controls, making adjustments, or performing procedures, other than those
specifi ed herein, may result in hazardous radiation exposure. Do not open covers
and do not repair unit yourself. Refer servicing to qualifi ed personnel.
To reduce the risk of fi re, electric shock, or product damage, do not expose this
apparatus to rain, moisture, dripping, or splashing, and take care that no objects
lled with liquids, such as vases, are placed on this product.
Do not install or place this unit in a bookcase, built-in cabinet, or other confi ned
space. Do not obstruct the unit’s ventilation openings with newspapers, tablecloths,
curtains or similar items. Ensure the unit is well-ventilated to prevent risk of
electrical shock or fi re hazard due to overheating.
Do not place sources of naked fl ames, such as lighted candles, on this unit. Dispose of batteries
in an environmentally friendly manner.
THE FOLLOWING APPLIES ONLY TO THE U.S.A. AND CANADA
- To prevent electric shock, match wide blade of plug to wide slot and fully insert. If the plug that
comes with this unit does not fi t into your electrical outlet, consult an electrician.
FOR THE MIDDLE EAST, SOUTH AFRICA, AND ASIA
- This unit is intended for use in tropical climates.
FOR AUSTRALIA AND NEW ZEALAND
- This unit is intended for moderate climates.
This product may receive radio interference caused by mobile telephones during use. If such
inference occurs, increase the distance between the product and the mobile telephone.
DANGER: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID DIRECT EXPOSURE TO BEAM. (FDA 21 CFR)
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN.
AVOID EXPOSURE TO BEAM. (IEC60825-1)
THE FOLLOWING APPLIES ONLY IN THE U.S.A.
This equipment has been tested and found to comply with the limits for a class B digital device,
pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that into which the receiver
is connected.
Consult the dealer or an experienced radio/TV technician for assistance.
Any unauthorized changes or modifi cations to this equipment will void the user’s authority to
operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA:
FOLLOW THE SAFETY INSTRUCTIONS ON THE UNIT AND SAFETY PRECAUTIONS LISTED BELOW.
Keep these operating instructions handy for future reference.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install according to the manufacturer’s instructions.
Do not defeat the purpose of the polarized grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blades or the third prong are provided for your safety. If the provided plug does not fi t
your outlet, consult an electrician for a replacement of the obsolete outlet.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus,
including amplifi ers, that produce heat.
Protect the power cord from being walked on or pinched, particularly at the plugs, convenience
receptacles, and the point at which they exit from the apparatus.
Only use the attachments/accessories specifi ed by the manufacturer.
CAUTION - The socket-outlet shall be installed near the equipment and shall be easily acces-
sible.
Use only with a cart, stand, tripod, bracket, or table specifi ed by the manufacturer
or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to
avoid injury from tip-over.
Unplug this apparatus during lightning storms or when unused for long periods of a time.
Refer all servicing to qualifi ed personnel. Servicing is required when the apparatus has been dam-
aged in any way, such as when a power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, or the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
OUTDOOR USE WARNING
To reduce the risk of fi re or electric shock, do not expose this apparatus to rain or moisture.
This apparatus must not be used outdoors
18
Important Safety Instructions
This symbol is intended to alert the user to the presense of uninsulated “dangerous
voltage” within the product’s enclosure that may be of suffi cient magnitude to consi-
titute a risk of electric shock to persons.
The symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the appliance.
The laser product label has not been attached to products for the U.S.A. and Canada.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kiss dp 600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kiss dp 600 in the language / languages: English as an attachment in your email.

The manual is 9,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info