483669
4
Zoom out
Zoom in
Previous page
1/88
Next page
4
A
Do not position the laser tool in a manner that may cause someone to unintentionally look into the laser
beam. Serious eye injury may result.
Do not operate the laser tool in explosive environments, i.e. in the presence of gases or fl ammable liquids.
Do not attempt to view the laser beam through optical tools such as telescopes, as serious eye injury may
result.
Do not attempt to repair or disassemble the laser tool. Attempts to repair the tool by unquali ed persons
may result in serious injury.
sPeciFicatioNs
Laser class: 2
Laser output power: <1mW
Laser wavelength: 635nm
Accuracy of laser: +/-0.5mm/M
Accuracy of vial level: +/-0.5mm/M
Speed of rotation: 0-1000 rounds/minute
Measuring range of laser dot: max 50M (indoor)
Measuring range of laser line: max 15M (indoor)
Power supply: 4 x AA alkaline batteries (not included)
Operating temperature: 0°C to 40°C
tool elemeNts
A Laser point opening
B LED Light
C Switch for laser ON/OFF system
D Battery compartment cover
E 3 vials
F Adjustment knobs
Battery Installations
Twist the button, pull out battery compartment, and insert
4 AA alkaline batteries (not included), making sure that the + and – terminals are
orientated correctly. Twist the button again to close the battery compartment. (Figure
1)
Setting the Rotary Laser Level base
Set the Rotary Laser Level on any smooth surface or mount to a tripod.
Adjust the levelling screws until the bubbles in the two vials are all centred. Each
levelling screw controls the vial level opposite the screw (the front levelling screw
controls the ‘Y axis, and the side levelling screw controls the ‘X’ axis). (Figure 2)
Operating the Rotary Laser Level
• Place the Rotary Laser Level on a fl at surface or tripod
• Check that the bubbles in the vials are centred before operation.
• Rotate the switch to ON to emit laser dots. The rotary speed can be adjusted by rotating the switch button
(Figure 3,4). When the switch is adjusted to high speed, a laser line will appear.
To project the laser beam at your target manually, stop the rotation of the head.
1
2
“Y axis
“X” axis
On/O
On/O
Low speed High speed
3 4
72087_manual NIEUW.indd 4 08-11-11 10:33
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kinzo 72087 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 72087 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info