483668

Kinzo 72085 Manual

3
Zoom out
Zoom in
Previous page
1/80
Next page
3
A
TECHNICAL SPECIFICATIONS
Laser Class: II
Laser output power: 1 mW
Measuring range: 30-100m (100-300) of visible light, depending on work area illumination.
Wavelength: 650nm
Accuracy of vials on level: *1.0 mm/m
Laser level accuracy: Line: 0.3°/m
Cross: 0.3°/m
Power supply: 2 X AA batteries (not included)
CHANGING THE BATTERIES AND ACTIVATING LASER BEAM
Slide open the cover on the back of the unit (as indicated) and insert 2 AA batteries (not
included).
To turn the unit on, press the horizontal and/or vertical button(s). To turn it o, press the
same button(s) again.
Please note: Used/discharged batteries are hazardous waste and must be disposed of
properly.
ASSEMBLY AND ADJUSTMENT
Open the tripod and position it firmly on a surface that is even and as near level as pos-
sible. For uneven surfaces and inclines, compensate by adjusting the telescoping legs of
the tripod and level with the aid of the angle-setting vial (found at the top of the tripod).
Tightly screw the swivelling base to the levelling platform.
Use the three (3) adjusting screws in conjunction with the angle-setting vials (at the top
of the base) to level the levelling platform.
The self-adjusting laser can be used either with the tripod or independently.
HORIZONTAL AND/OR VERTICAL LINE PROJECTION
Pressing the vertical and/or horizontal buttons on the top of the unit will generate a vertical, horizontal or
cross-hair laser beam. The red lights next to the buttons will indicate which of the two has been turned on. To
turn o simply press the illuminated buttons once more.
If you have loosened the knob on the bottom of the unit (as per the previous page) allow the unit 8-10
seconds level itself. If there is no movement in the lines, it is likely the bottom has not been suciently
loosened.
laser beam
Horizontal
laser button
Vertical
laser button
Lock
Swivelling
base
Level adjus-
ting screws (3)
72085 manual.indd 3 07-11-11 16:35
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kinzo 72085 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 72085 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info