483664

Kinzo 71799 Manual

6
Zoom out
Zoom in
Previous page
1/56
Next page
6
A
8.4 Grip position adjust
Push the button backward, rotate grip to left or right at the same time.
8.5 General cutting
Clamp your work piece if it is portable. Rest the front shoe of the saw on your work piece (be sure the blade is
not contacting the work piece) and start the saw, exerting enough pressure in the direction of the cut to keep
the shoe pressed  rmly against the work piece at all times. Do not force the cut or stall the saw. Don’t bend or
twist the blade, let the tool and the blade do the work.
In general, coarser blades are for wood, plastics, and composites, and ner blades are for cutting metal. Chat-
tering or vibration may indicate you need a  ner blade or higher speed. If the blade overheats or clogs, it may
indicate you need a coarser blade. Replace blades when they become dull. Dull blades will produce poor re-
sults and may overheat the saw.
8.6 Plunge cutting
Clearly mark the line of cut, from a convenient starting point within the cut out area. Place the tip of the blade
over that point with saw parallel to the line of cut, slowing lower the saw until the bottom edge of the shoe
rests on the work piece and the blade not touching the work piece. Start the saw and allow it to attain full
speed. With the saw resting on the shoe, slowly tilt the saw forward to lower the blade onto the cut line. Con-
tinue this motion until the saw blade is perpendicular to the work piece.
8.7 Metal cutting
Blades speci cally designated for cutting metals must be used for this purpose. You may use light oil as a
coolant when cutting metal, this will prevent overheating of the blade, help the blade cut faster, and promote
longer blade life.
9 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power plug.
9.1 Cleaning
• Keep the ventilation slots of the machine clean to prevent overheating of the engine.
• Regularly clean the machine housing with a soft cloth, preferably after each use.
• Keep the ventilation slots free from dust and dirt.
• If the dirt does not come o use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may damage
the plastic parts.
9.2 Replacement f carbon brushes
Remove and check the carbon brushes regularly. Replace when they have worn down to the limit mark. Keep
the carbon brushes clean and free to slip in the holders. Both carbon brushes must be replaced at the same
time. Only use original carbon brushes.
10 TECHNICAL DATA
Voltage / frequency 230-240V ~ 50Hz
Power input 710W
No load speed 0-2500 min-1
Max. cutting depth 115mm
Carbon brush cover
Grip
71799 manual.indd 6 13-01-11 12:59
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kinzo 71799 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 71799 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info