483680

Kinzo 71779 Manual

6
Zoom out
Zoom in
Previous page
1/44
Next page
6
A
General
Never use a blade unsuitable for the task and item to be cut.
Hold the saw in front of you with a firm grip on the handle.
Ensure that the saw blade is not touching anything and that the power cable is not in the way when starting
the saw.
Make sure that the item is clamped tight, and that the saw line is clearly marked.
Connect the vacuum extractor nozzle to an extractor system where possible.
Start the saw. Place the soleplate on the item, and let the saw blade touch the saw line.
Saw, but do not place more pressure on the blade than is necessary. Avoid lateral pressure on the blade.
Special notes on jig sawing
Place the soleplate on the item so the saw blade is vertical and correctly positioned in relation to the saw line
without touching it.
Start the saw and tilt it carefully while supporting it using the soleplate until the blade touches the item at
the saw line.
Let the blade work through the item, continuing to tip the saw downwards until the sole is flush to the item
and the blade is perpendicular to it. If necessary, drill a hole of suitable diameter in the item for use as starting
point.
Sawing wood
Check that the item does not contain nails or other metal objects. Always wear a mask.
Sawing metal
We recommend lubricating the material and saw blade with cutting oil to protect the tool and avoid over-
heating. Support the item with wooden blocks on either side.
Sawing plastic
Make a test cut first to check if the material can tolerate the heat generated by sawing.
Important!
Check all screws on the saw regularly, particularly those that hold the blade. Tighten if required.
Check regularly that the carbon brushes are in a good condition. If the carbon brushes are worn,
they should be replaced.
Lubrication (Fig. 2)
Regularly apply a drop of oil to lubricate the guide roller (7).
cleaninG and mainTenance
Wipe the saw using a well-wrung cloth after use, and always keep the surface and ventilation holes free of
dirt. Keep the soleplate free of dirt to avoid the saw cutting incorrectly.
Never use corrosive or abrasive cleaning agents, as they may attack the plastic parts of the saw.
recyclinG
Meaning of crossed –out wheeled dustbin:
Do not dispose of electrical appliances as unsorted municipal waste, use separate collection facili-
ties. Contact you local government for information regarding the collection systems available. If
electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the
groundwater and get into the food chain, damaging your health and well-being.
When replacing old appliances with new ones, the retailer is legally obligated to take back your old ap-
pliance for disposals at least free of charge
71779 manual.indd 6 31-12-10 14:49
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kinzo 71779 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kinzo 71779 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 5,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info