26
1. List of baby cot components - page 3
2. Mounting of the cot:
Prepare a suitable surface so as not to damage the product during installation. Slide the side frame (B) into
the main frame (A) until you hear a characteristic click (fig.1). Slide the cover onto the exposed parts of the
side frame (fig. 2). Put the material on the tube of the main frame and fasten the zipper (fig. 3a). CAUTION!
Remember to protect the zip against unfastening (fig. 3b). Connect the tube of the drop-side with the
upper part of the frame (fig. 4) and secure it with the lock at both ends (fig. 5). CAUTION! Remember to
protect the lock against unfastening (fig. 6). Place the cot on the side opposite the drop-side. Slide the
crossbar (E) into the legs and make sure the latches on both sides are secured (fig. 7). Put the cot back in an
upright position. Attach the centre support (C) to the side support (D). The latches are properly secured only
if you have heard a characteristic click (fig. 8). Connect the resulting structure to the legs by sliding it on
both sides until it locks in place (fig. 9). Attach Velcro straps around the brackets on the bottom (fig. 10).
Wrap the free end of the cover around the side support and fasten it with Velcro straps to the bottom of
the cot (fig. 11). Atach the Velcro straps around the supports on the sides of the cot (fig. 12). Insert the
mattress into the cot. The assembled product is shown in fig. 13.
3. Height adjustment:
The cot is adjustable to 5 different heights. To adjust the desired height hold the cot with your foot, move
button A sideways while pressing button B and adjust the frame of the cot to the desired height (fig.14)
4. Bedside cot:
To connect the cot to the parents' bed, remove the safety devices at the locks (fig. 15). Unlock the zips on
both sides (fig. 16). Slide the lever and slide out the tube of the side panel (fig. 17). Repeat on the other side.
Remove the side panel of the cot (fig. 18) and pull the tube out of it. Adjust the height of the cot to the
parents' bed (fig. 19). Fasten the buckle of the fastening straps to the cot (fig. 20). Interleave the straps
either through the whole bed or only through its side bar (fig. 21) and adjust so that the cot is fixed securely
to the parents' bed (fig. 22). Roll the loose parts of the straps (H) under the cot. To move the cot as close as
possible to the base of the parent's bed, move button A sideways (fig. 23) and at the same time press button
B. Move the legs to the desired distance. ATTENTION! Make sure that the straps are properly adjusted and
the cot is adjacent to the mattress of the parents' bed (fig. 22).
5. Locking the wheels:
The cot has 2 wheels that allow to move the cot and to connect it with the parents' bed. To lock the wheels,
press the locking button down. To unlock, move the button upwards (fig. 24).
6. Maintenance and cleaning
Frame - clean with a soft, clean and dry cloth.
