798573

Kidsmill 60 s - Cot 140x70 Manual

5
Zoom out
Zoom in
Previous page
1/24
Next page
EN - 5
KIDSMILL
COT 140
60S
IMPORTANT! RETAIN THESE INSTRUCTIONS FOR
FUTURE REFERENCE AND READ CAREFULLY
CONGRATULATIONS
Congratulations on your purchase of this cot bed . This product meets the most stringent safety
requirements according to the European standard EN-716-1:2008+A1:2013. Using this cot bed
can only be safe when used according to the instructions given in these instructions. Please read
this instruction manual carefully and store it for future reference. The safety of your child may be
affected if these instructions are not followed.
WARNINGS
• Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires,
gas fires, etc. in the near vicinity of the cot.
• Do not use the cot if any part is broken, torn or missing and use only spare parts approved
by the manufacturer.
• Do not leave anything in the cot or place the cot close to another product, which could
provide a foothold or present a danger of suffocation or strangulation, e.g. strings,
blind/curtain cords, etc.
• Do not use more than one mattress in the cot.
SAFETY MEASURES
• The thickness of the mattress shall be such that the internal height (surface of the mattress
to the upper edge of the cot frame) is at least 500 mm in the lowest position of the cot base
and at least 200 mm in the highest position of the cot base.
• The maximum thickness of the mattress, with the base in the highest position, is indicated
with a mark on the cot.
• This cot is designed for a mattress size of 70x140 cm . We advise to use a mattress of the
same size. In other cases should the length and width of the mattress be such that the gap
between the mattress and the sides and ends does not exceed 30 mm.
• All assembly fittings should always be tightened properly and the fittings should be
checked regularly and retightened as necessary.
• To prevent injury from falls, the cot shall no longer be used for the child when the child is
able to climb out of the cot.
• The lowest position of the base is the safest. The base should always be used in that
position as soon as the baby is old enough to sit up.
•
It is essential to remove detachable support rails before the cot is used in its lowest position.
• The thickness of the mattress shall be such that the internal height (surface of the mattress
to the upper edge of the cot frame) is at least 500 mm in the lowest position of the cot base
and at least 200 mm in the highest position of the cot base.
• The maximum thickness of the mattress, with the base in the highest position, is indicated
with a mark on the cot.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Kidsmill 60 s - Cot 140x70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Kidsmill 60 s - Cot 140x70 in the language / languages: English, German, Dutch as an attachment in your email.

The manual is 6.24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info